Or just run a pipe fron valve block to reservoir from above just to check if it fills up and lifts ok the you know you have a leak and can worry...
Are you leaving the door open for the reservoir to have enough time to fill seems you were pushing the control but not leaving much time for ti to...
Sprayed the yellow connectors on the srs under the seats and the belt pretensioners and changed both bulbs in dash still not resolved srs light...
I've never done them before so I've I can just take them off and get them pressed out that's the way I be going
I'd rather go original but will probley be doin it on stands as have no garage so will check how the poly bushes seem to be with other posts I've...
Thanks Henry b I've read post that said the poly bushes were ok
can anybody recommend a good press come puller for doing all the bushes and the wheel bearings cheers 4.6 Thor 1999/2000
Not much help only suggestion is take it back to where you had it done I've any sort of warranty
He's an expert aswell when mine went tits up they both put me right and + 1 on kurtjohnsons valve blocks ect
Read wammers post in the tech section
I've your doin the valve block make sure you follow wammers eas tec section there's a good link on there
It's in the optional extras package I think
This fella forgot his tool box today but on a 19 plate he could be forgiven
Weldone on your fix that's all I did was run the pipe that way it's been ok for about 6 months now and that includes a run to Scotland from Kent...
Fink I found it data up behind the glovebox that be a job for next wkend cheers
Oh it's a 1999 no it just says drivers airbag I will clean the connections into the ecu where is it located
Cheers data it's not a constant fault will try the car this week making sure the battery is fully charged and see how it goes
Yer tried clearing fault but it just came back and brand new battery last week
I used a nanocom left battery disconnected for 30 mins cleaned the plugs then refitted battery and got that code data
Separate names with a comma.