The arm is free to move until the clutch release bearing contacts the clutch fingers.
It may well have been me who mentioned the pipe trick....
To test if vacuum pump is working remove pipe from servo and put your thumb over the end with engine on tick over. Pipe should stick to thumb.
Seems to what ? go with engine speed ? Or gearbox speed ? Or constant with the speed of the truck?
Stan, I have news for you, once in a vapor diesel is very flammable.
Had one go on my Focus diesel a while back. My wife came home saying the car stank and she was feeling unwell. When I opened the bonnet there was...
Not fully fitted yet. Do what OSD says when it is all set up.
:) sorted . I made up a new direct line from switch to starter and mine has been good to.
He did say the coolant tank had been recently replaced [ how recent and why was not said ] so was covering the bases.
Sounds like what you get when air is in the system. It may not have been properly blead. Just filling expansion tank is not enough, the plug in...
Doubt if driving in 4wd would have made much difference, probably would have gone anyway.
I thought 300's had the stay that just clips up under the bonnet, not the folding type like series and 90 110.
Ruin's the aerodynamics.;):D or may create an airflow that prevents fly's splatting on the screen.
One thing you can cross off your list is carpet, no matter what you do with a defender it Will sooner or later get wet, promote rust and smell....
Second ammo box, they come in a variety of sizes.
Late 2a hubs will also suit.
Hope that water is not salty.
Wheels are the same stud pattern.
There was a change in wheel stud size somewhere in the middle of 2a production from screw in studs and smaller wheel nuts [ my 63 has the small]...
It is the switch then, just not working right.
MUD UK do the proper stuff. Including Carling switches.
Separate names with a comma.