Yes, the cables should be very tight !!!!
with the whole thing on the floor, there is a cover on the back of the motor held in by 3 screws...
Ive done this about 4 times now and you are right its fiddly !!!!
you should be able to fully assemble off the car.
As I said if you have the...
If done properly, the cables should be so tight that they cant come off the pulleys
You sure you have them tight enough ??
anyone in the NW got a cb set up they would like to sell ......... cheap !!
looking for complete package
radio, mic, leads, aerial (mag...
my ball joint knocked going over white lines !!!
replied on FL Club !!
thanks Vic - brilliant explaination :5bcheers2:
yep, that was only explaiation I could come up with for over filling
will check level again...
I would go the whole hog Stuart ............... if you lived next door !!!!:D
As per a previous post I have a diff leak - probably from pinion oilseal
thought id top it up today
car level - removed plug
well youve lost me now Stuart !!!!
dont mind spanners but electrics !!!???
Think ill just leave my switches where they are !!!!
Ill get on with the front ones for now !!
Sure ill be speaking to you again when i come to wire up the switches !!!
Got the handles - just the off side rear missing - if you know where there is one !!!
Ive managed to get hold of all the plugs ........... yipee !!
Found somewhere with handles (and cables !) cheap !! trouble is...
I know its probably a matter of opinion, but what are your recommendations for engine oil and diff oil on an xedi ??
like yours mine has manual rear windows
the manual winder looks as though it will be a tight fit ???
oh yes - thought it rang a bell !!
rotary coupler ???
If you get really stuck - have it sent to me and I will post it to ya !!!
Ill think Ill stick to my old way - cracking the bleed nipple, ill probably get air in the system knowing my luck !!
About to fit new discs and pads
usually i push piston back in with cap off reservoir then remove excess fluid from reservoir.
haynes says to...
Separate names with a comma.