I fitted the GL front kit, including new LR mud flaps, as mine had perished and fallen off... been on for a few years now... would highly...
Having lined the rear a few years ago this was an overdue job... so finally got around to relining the front section: I never realised or expected...
Fitted some grab handles on the A Pillar... used Genuine Part door handles, and upgraded the screws to set screws... used M4 tap to cut thread...
No, just sanded to bare metal, and degreased with some thinners. The Raptor instructions seemed to suggest this would work, but using their...
I just sprayed Raptor on my Rock Sliders... sanded down to bare metal, degreased and sprayed direct... on the aluminium chequer plate I etch...
Finally got around to Raptor coating my rock sliders.... came out a bit rougher than expected, as my Schutz gun wasn't cleaned out properly when I...
Fitted Gwyn Lewis front mud flap kit. Had to remove Dirt Defenders when I fitted rock slider/ side impact sill bars... these work much better,...
Looks like Malvern is back on this Sunday... joint venture with Tractor World which might add a bit more to look at... anyone going? Malvern 4x4,...
Passed the MOT with the usual advisory... minor oil leak!
I've seen a kit to inject/dose LPG into a TD5... heard of it before, supposed to reduce engine temps - so ideal for tuned TD5's that are prone to...
Just remember to leave the nut on loose for when it does finally come free, otherwise you may be asking santa for two front teeth!
Ashcroft conversion... best money I've spent... transformed my 90... pricey, but with all that's involved I reckon it was good value.
I'm not into caravanning, so had never heard of these: Caravan Spring Assisters | Suspension Modifications (caravanhelper.co.uk) I'm wondering...
Thanks Turbo Nothing listed for Red/Red/Pink... but possibly the NTC5527/Disco V8 rear - which does sound familiar. Any idea what the rubber...
Reviving an old thread here... Found these in the shed... I think they're off a Disco 1... if anyone can help identify them? Looks like...
I had a problem with my 90 TD5 eating rear shock bushes, so went for the poly bushes... re-used old metal collars/ washers.... no more clunking,...
I fitted a VDO unit... still going strong after 50,000 miles/6yrs.
Waxoyled the underside... used the Schutz canisters (x2) from Mmart, which seemed to do a good job.... 82p roll of tinfoil from local shop did the...
[ATTACH] My fan came with these, and I bought some more from Demon Tweeks... I think Rimmer Bros do them too. They poke between the water tubes...
Replaced backrest foam on drivers seat as side bolsters had collapsed - forgotten how comfy and supportive the original seat could be... I thought...
Separate names with a comma.
