know this is a very old post and you've been missing for a while, but wondered if you went ahead with this setup in the end and if so, what it was...
I'd check the pads to see if they are all wearing evenly at the same rate side to side and also to make sure no pads are wearing at different...
I think we're agreeing about being able to leave dents. However with the raptor all I had to do was give a quick buff with 120 grit and etch any...
Just painted most of my 90 with black raptor bed liner. I know the raptor splits opinions, but mainly for off road, most panels are dented and it...
Gonna need a bit more info than that bud. Is the 110 a v8 200tdi 300tdi td5 age etc. And as said gearstick would be in wrong place on a disco box,...
Hi Is this still available? Thanks
FREE!!! if you come and get it, you can have it. Its ****ing me off getting in the way in my garage
Hi all After a brake assembly from an EW series Tmax winch, or complete winch for spares, working or not.
I may be wrong but I'm pretty certain you can just about see he already has a cross drilled input gear, at the beginning of the video.
I will. Just spacer and tape measure are in the garage unit and I'm on the sofa with beer, so LZ first (and lazy) port of call
So I've got hold of some 30mm spacers that turn out to be slightly too small for my defender. Any of you clever people out there give me a clue...
Hi all, I have 1 x 16x10 modular wheel with bead lock and 305 70 16 tyre off a defender. Tyre is in good condition with no cracking or wear and...
And appreciate in value!
I think stephan333 is full of ****. Its a scam just sent me the exact same message to email Mike brown but in Texas. Incidentally, why the hell...
If you've checked the wheels and presumably the bearings, just start working your way up from there. Ie bushings, prop shafts and ujs. Are there...
Just noticed on the Timken bearing it says Made in England! Rare thing to see now, on anything!! Shame. They had a factory not far from me in...
Well got it drained and the cover off. At least it had ATF in it. Not too much swarf on the plug and although the shaft needs a bit of a clean up...
Will do. Thanks for the tips gents
Cool. Thanks. I'll give it a go this evening and pop up some pics. Cheers
Is that as easy as just undoing those 6 bolts and having a look behind?
Separate names with a comma.
