You’ll still run out of air, because you need a bigger cfm compressor
Time for some duct tape
typical series, has a bad earth in third photo
What are your liner heights ?
Looking at the state of the bottom hinge on the bulkhead, the chassis won’t have escaped the tin worm, the bends over the rear axle, and front...
Series 1, 86” chassis
Treat it to a new air filter
Are you running the discs from a servo ?
I thought towbar electrics needed to be enabled via diagnostics, years ago mine did anyway
That’s a bummer
You would expect that to be more than enough travel,
Do you think you may have used too much force and bent the clutch plate?
It was the cheaper rods, or”low hydrogen rods” that mixed slag in the weld, better quality rods were so much better, easier to use and stronger
Search on here for “3 amigos”
Did you put any lube on clutch splines, did the plate slide easily on the splines, did you install clutch plate the correct way, there is a right...
Did you simply refuel it with petrol ?
Too much heat, try your welder on 2, and slow your wire speed
Possibly just needs a new battery
Has she said “ it’s me or the truck “ yet ?
As said, get the codes cleared and see what comes back
Separate names with a comma.