My old 19J got a bit cleaner on startup after cleaning the injector nozzles. Easy job once out. I put them in my ultrasonic cleaner. Fit new...
When I fitted mine I experienced the same mounting width issue. In the end I used some 2x1" steel box section and simply drilled offset to fit the...
Bearmach screen rubbers are OK IMHO. As above, warm it first, lots of lube and don't force anything!
Forgot to mention that there are some good videos on youTube explaining how to rebuild 200 TDI injectors. Ideally they should be leak and pressure...
Did my 200 stem seals in situ last year. Not difficult but a bit fiddly. Made a simple tool from a 6 mm thick strip of steel. Two of the seals had...
Have a look on lrworkshop.com for parts diagrams for your model and year of vehicle.
The standard Hymer seat are high quality ISRI, and worth rebuilding in most cases. However, if you really wish to fit something else, most other...
Have a look on YouTube at Olly's channel- Sixth Element Engineering. He is a friendly guy and has recently done this conversion. Juice motors are...
@miktdish19J is an indirect diesel engine as the fuel is injected into pre-combustion chambers. Try cranking with the clutch pedal down. This...
I'm sure you know what you are doing, but it might be worth getting some isolator primer, especially if it has been previously painted in...
Rear bracket replaces the bracket fitted to the tow bar anchor brackets, but I reckon you could add a plate to what is already fitted.
These may help.....found on the web. Do you have a front fitted already? I would be interested to know how you get on.[ATTACH] [ATTACH] [ATTACH]
Hard to diagnose without experiencing the issue in person, however, worth checking that the oil is at the correct level and perhaps drain the oil...
Fingers and toes crossed for you here. Let's all hope you've cracked it as I can imagine how you have felt at times. After a three year rebuild of...
Might be worth contacting Simon at Motodrome. I have never purchased anything from them, but they appear to have an open and honest approach to...
If all grounds are good, check that a supressor is fitted to your alternator. Usually mounts externally and connects to the back of the unit via a...
Good work. Contrary to popular belief, these seats can easily be modified for full access to the battery. Simply remove the four M8 bolts on the...
Love A65s and Superdreams (have owned 250s and 400s). You can't beat a Spitfire with a 5 gallon tank for looks. I had one on my A65 and it was a...
I have the same sunroof in my '89 90. I believe that Brittax (who made the originals) were bought out by Webasto, and you could ask them, however,...
Yes, as above. If you don't, you will loose power and possibly some economy. If you clock the turbo you can make the pipework slightly simpler...
Separate names with a comma.
