Yea we are really happy with that just guna work through getting the chassis cleaned repaired where needed and sealed etc oil leaks one has been...
Yea new hubs on her list of parts needed so it'll be done in fairly soon.
Removed the sensor for the third time so I could clean top of the hub where it mounts back tk bare. Metal... I plugged the hole with tissue.. And...
So at 8am this morning I took out the sensor again and sanded down the are it mounts to bar to barew metal. Before [ATTACH] After [ATTACH] So...
Thanks for the link . And the advice. I'll definitely get a hub ordered. I'm taking tools to billing so if it passes the mot and I see one there...
Glad its not just me. With this luck then
Small update.. New abs sensor came this evening.... [ATTACH] [ATTACH] cleared the fault for all of 5mins and its back... [ATTACH] [ATTACH] Re...
Update.... Fitted the new sensor and got this... [ATTACH] A nice dash with no lights.... But sadly was short lived... As withing 5mins of...
Yea I'm more then happy with mine seems good quality and like I say has changed my welding game. Competely
Recently upgraded my old Clarke 151EN to a euro torch conversion few weeks back... And what a difference it makes! Can still use it for gas...
Ha dit on a machine New sensor ordered from amazon.. Bargain price aswell was getting daft quotes from lost places local to me. [ATTACH] So while...
You where correct took it for a little drive this morning and boom 3 amigos appeared fairly quickly... [ATTACH] Took it to garage he put the...
So we had an mot end of the week. Decent sized list as you can see.. [ATTACH] So everything on that list bar the oil leaks and chassis corrosion...
So, hubs stripped and sensors checked... They where covered in buts of rust etc.. [ATTACH] Cleaned the rust flakes off them. And the vehicle...
It Did not got it back yesterday morning... 15 faults that needed sorting sorting to pass... I've managed to get 9 boxed off yesterday... Guna box...
It was a diff I fitted didn't swap axles. I have a disco one in my lock up ut all totally different. I have to swap out the upper ball joints on...
This is for the reply I had thought of doing that so will definitely do all that. Dont want to be buying parts on a whim.
Yea I have a few things I think it may fail on it was booked anyway so figured I'd get the list of fails and work through them. Been doing non...
Yea I reckon the centre will take a beating, And something is bound to get damaged. I'll give that a try today. When it's back from MOT, if it is...
Anyway of telling on the exterior of the diff if its the right one? Like any numbers stamped on it or anything?
Separate names with a comma.
