It's a v8, right? My compressor was also leaking from the same seal, but worse than yours - even then the ac went a year between recharges...but...
So, what's the deal then Pete? Fully charged system but the clutch does not engage?
Airtex
First of all the air gap probably got screwed up when the temp spiked (unless you refilled after that). Dumping coolant can just be a function of...
072 works fine on a GEMS V8 if the car electrics are in good order and you upgrade the VR.
Who mentioned a passive alarm? We don't have one. The passive immobiliser is what is turned off in nanocom when you set immobiliser to...
It's been a while since i went and did all the testing/ analysis, but agreed - you cannot disable the EKA once the engine is disabled. On the...
I think i have those RTG ones. Not had a problem in 2 yrs
Reasonably yes.... If you're doing it for the first time I'd recommend removing the alternator, and then replacing the VR on a bench, as some of...
Search my posts to check, but from memory mobiletron vr-153a will fit to an a127m alternator cage ie lucas/ magneti marelli. I have two similar...
possibly.... it doesn't look quite right. but for the price you may as well give it a go
Lazbaz, meanwhile, check out this link https://www.woodauto.com/bom/35221/BOSCH-0123520022 though sourcing may be a challenge. I think Mobiletron...
Datatek lives : o) Welcome back...
I'd possibly reset the adaptive settings and let the engine relearn... mine rev'd high after a clean out of IACV/ MAF - reset settings, and all...
I recommend you use the hose pipe trick to locate the blow kermit - will save you removing things "for inspection". I had this on my 4L Defender...
Aluminium... you could use ali cleaner, or I think i just rubbed mine down with emery paper - and then applied black hammerite. Still looks good...
Hi Kermit, do you have a vid of the squeaking sound? Use a bit of hose and an ear to locate the squeak... If it's a chirping sound then cd be...
+1 monroes, which mine sits on.
Not a specialist, just had to go through a few rounds of problem solving already on my gems 4.6.
Ok, what about the next steps ;-)
Separate names with a comma.
