When you say "managed to unplug" do you mean it was accidental? Perhaps stretched the wire? I'd say the first thing to do would be to replace that...
It would seem that way. Awfully sorry.
Forgot to check this after work yesterday. Just done it this evening. Bonnet closed - no honking. Now I know what that switch is for on the...
Ah. A light has gone on in my head. I shall close the bonnet and try again...
Every time I lock the doors on my project Disco the horn sounds for a split second. I thought that this was just some feedback so you knew the car...
Does it still "clunk" when you activate central locking? Might just be the lever that goes from the actuator mechanism to the actual lock that has...
Could mean the rods/bushes in the control arms. Replacing a whole control arm is quite easy but expensive. Replacing a bush is difficult without a...
Idler pulley bearing? Slacken off the belt and give it a jiggle. Should be no movement at all.
I'd start with the throttle pedal. It's just a variable resistor. Easy to check if you have access to a spare one to test.
Been busy doing mainly cosmetic stuff with Project Disco over the last few days as I want it looking as good as possible for the Shetland Classic...
Just a small update today. The Disco came with chequer plate on the bonnet when I bought it. I removed it during the build as it wasn't lined up...
I put M14 120 bolts in mine. They're a bit long and protrude about 10 - 15mm through the captive threaded tube in the top of the chassis. M14 100...
Been another busy couple of days. Here's the latest progress update: Chequer plate bed floor now riveted down. Battery compartment cover fastened...
About £150 each for good condition.
The motors are inside the light unit so to do anything with them I'd need to open them up. Given the ridiculous price of 2nd hand units, never...
Has anyone successfully taken these apart? I've been fiddling for hours with one of mine and I can't see how they come apart, if indeed they do. I...
I've made good progress on the bodywork and problem solving the last few days. Bodywork wise I only need to paint the passenger side door and...
Yes. I had a spare one.
I had this problem on my old Defender. The water was leaking from the pump shaft into the cavity between the water pump and the power steering pump.
Are you getting drips from the weep hole on the bottom of the casting?
Separate names with a comma.
