This item is now SOLD
Also note the Patent number on the OEM gasket, A patent protection only lasts 20 years, after such time every manufacturer can jump on the band...
Do you mean the Payen Mk3 gasket used by Lotus (RLVB 000320) ? They tend to be over priced and less available Agreed about the OP'er no...
I was one of the first home mechanics to fit the LR MLS gasket (LVB 500190) in July 2006, after it's launch in March 2006, the extra shim give...
Fitted a BGA aftermarket gasket (BGA 1406 140620) in May 2018, within 12 months there were tell tale signs of head gasket failure, mayo in coolant...
AVOID AVOID AVOID these aftermarket gaskets by BGA I have never seen a gasket deteriorate so much in around a year and just under 2k miles The...
Checking the head bolt limit < 97mm These bolts are at 93mm
Well done that man, Norn' Iron style !!
Thanks but I am well aware of the whole setup!! Did you know the rear drop window was nearly scrapped in the project CB40 trial days and then some...
Good stuff, thanks, had seen the link in your previous post
True, but where is the fun in that? Here's one I did earlier, note the FL1 jacked up and engine on it's own red oak engine trolley, with jacks ;)
Only trawling through this old thread, best to PM members about specifics, as only subscribed threads throw up email notifications! The original...
We always do our best on LZ, I am sure you will source a part, I have a spare one (still in the IRD) if by chance you are stuck? They are...
I see! ............call me a sceptic but my first query would be who did the MLS gasket refit, too many unknowns if the crank rotated in a...
Поздрави другови, навоји увек остају отворени за расправу и опозив, ИРД ће бити потпуно празан на неодређено вријеме, не бих савјетовао тако у...
If you listen carefully you can hear Ka's rusting, plus it's not legal to fit a tow bar on a Ka ! Ford = Found on Roadside Dead, RIP Henry !
That's the spirit !............ what ever you do; don't send it off a cliff !! If you have a compression gauge check compressions before you...
I believe you and that you're competent enough to take on the repair, like the others I was merely reiterating, sometimes it takes a fresh pair of...
Interesting!! Was it a high mileage engine? I'm guessing you were off on leave that day when that engine went through the assembly line at...
Not ideal !! ......but don't despair You need to find out where the coolant is going, as the others already said, possible the liners have...
Separate names with a comma.
