Check your injector lines for damage/leaks. Has the injector pump timing been messed with? Is the air filter setup correctly. Its probably...
Hi Jan, you wouldnt be in shropshire by any chance?
My 109 had disco axles, the flange, drive shafts and bolt patterns are all totally diffo. Stuffing disco flanges on a series axle tube is not all...
All fords below 2 litre at least on petrol engines share the same bell housing bolt pattern, and the tranny yorkie engine is no exception, except...
If you want something that doesnt take long to fit if your using a mechanic then think about the 200 tdi, the 300 allthough more readily available...
That looks a deffy chassis, did you post in the right section? There is a firm that makes series's chassis's with coil sprung axle mounts, if its...
If its the first time the engine is going on and it waint fit, try it without the clutch basket and plate to make sure nothing funny is going on.
I did mine a while back, using a similar method to the vid, only I welded some angles onto the chassis to put the legs of the puller onto, and the...
You can get a tool for undoing the uj bolts, I just use a spanner bent for the job.
It sounds daft I know, but they say the lightweight is heavier than the 88. 109 rear springs are beefier than 88 springs, no of leafs varies but...
Thanks guys the nicest thing I've heard in a while. I had a triumph, not a spitfire a 2000 mk2, bit of a rotbox and a head that warped if you...
I think all mot men must have a grudge against series's, your a tuff nut like me mr dawson werent you fooking about with yer landy in the snow the...
Its personal opinion but I dont approve of ammeters, they add a degree of unreliability and the wiring causes volt drop, 0.1v affects the charge...
Sorted, I use a big shifter to twist the leaf a bit to get the bolts through. Just be glad the mot man didnt want you to renew the chassis...
Nope dont do could have's, if I see my old landy driving down the road I'll just flash mi lights and think well done mate. I didnt give up with...
I put my front axle and springs on yesterday, so I could shift it today and didnt have to mess about, I just positioned the axle on some blocks of...
I went and flogged my old landy. I'm sticking to comfy, warm, dry, and quiet modern cars that dont need constant reapirs for a while, I'm getting...
Good - hard to find now. cheap - even harder. Good and Cheap, more chance of a flying pig, but if there are any they're probably landy owners.
Ok then. If you get fed up of that and you cant sort it then there are guage kits you can get for tanks, they are popular for kit cars and boat...
Unless you have a friendly mot man.
Separate names with a comma.