Can you fit a rear door gas strut and not cut your door card . I ended up cutting mine but rather it covered the strut and not cut it .
I do more on road than off , but its my shooting bus so need it capable off-road . doc has given me some real bad news so its all a bit mute , but...
Thats pretty much what i wanted to hear thanks ..... i know theres no direct comparison mt/at , but i wasnt convinced the maxxix muds were better...
My head is mashed searching forums and on google trying to decide which tyres to buy . BFG KO2 or MAXXIS MT-764 . Both have that aggressive...
MORE TEETH , that much i now realise . i believe 5mph over-read is accepted . I do believe bigger tyres will also do it . 31 inch in my case ....
Ok i re-built a t/box out of 2 one a disco the other a DEF , to put on my DEF 300tdi with 238/85-16 tyres and my speedo read spot-on before i did...
Hi thanks for your replies , I put a blue worm , and thought the other shaft worms in the box were the same ?. DEF 300tdi R380 box , 235/85-16...
I recently rebuilt my transfer box lt230 mostly with new gears in a disco case , noticed today on the m/way a rare occurrence for me , but speedo...
Hi im after a DEFENDER 300tdi diaphragm housing , Adjusting my smoke screw and the thread is stripped in the housing . so need another asap if...
Ok so looked at this leak again . It certainly does look like its leaking down from above . There is no leak at least so far from the intermediate...
That's good to know , so I'm worrying for nothing . I can relax now and chase the r380 leak . Someone has suggested the selector housing on top of...
all 80/90 GL4 , i will check for any other spec differences . Thanks for the help everyone .
I know what i have where now , But next top up maybe not ! knowing me . i did not have enough of the same brand to fill the transfer box , So ive...
What are peoples thoughts on mixing different branded oils , but of the same spec ie 80/90 gl4 .
swapped my transfer boxes today lt230 for one i've rebuilt , i was going to change the r380 output seal but as it was bone dry in between the 2...
Just nearly finished this lt230 build and ive used LOCTITE 243 BLUE , i did google 290 and it said it was a medium strength as is the 243 . Just...
Building this LT230 up , and the case ive used is a 28D######E and other bits are from a 22D and other bits are new , . But what it says is ie pre...
Does anyone know what the front and rear output housing to case TORQUE settings are . my manual says 26nm front and 25nm rear . But google...
[ATTACH]
[ATTACH] [ATTACH] Hope the pictures help
Separate names with a comma.
