obviously you have not bought the correct item, introduce yourself and someone's sure to tell you
had you entered your location on your profile, you may have found someone close by that had spares
this proves my point.
washing them is BAD
leave them with mud on, safer and gives better street cred
it's for the air pump and heater
of course it was :D
having done a 40mm lift on mine
bolts from bearmach via e bay, I wouldn't bother if ever did again, not that much difference
the amount of metal...
check the bolts holding the disc's on, I had a similar noise, the bottom bolt had fallen out,
I think what gets my goat, is that every forum I have ever joined, cars,hunting,shooting,hardcore s&m all have an intro page, and on joining I've...
I need new glasses.
thought you said, you were thinking of changing your socks:hysterically_laughi
I cant see why you should, especially if the pads are nearly new, I mean you don't replace disc's if changing pads, so why do the other way around
if all the above advice fails, and you can put up with a bodge, heres what I did with mine, I had all the same problems, but although my bodge...
that would be me then:D
I don't allow garages to torque the wheel nuts, as I've had buggered nuts before now (lol, that sounds bad)
the wheels have only been put on...
I've just popped around the shops, to check the noise had gone after tightening up all the nuts, sure enough it had, but I am the worlds worst for...
I'll up that to £22 and free pest control for a year:D
if your near me they are worth £20;)
alloy, cheers all, the sticker will be added to the dash to remind me
one way, would be to melt some wax and paint the bolt heads/body work, then fill with your silicone, allow to dry, then it will still be removable...
after seeing a few rear window/rear door problem posts this last week, Im so glad of my bodge
which was as welcome as a wet fart:D
It sounds to me like you have a problem with your flux capacitor
Separate names with a comma.