Replaced the clutch master cylinder seems to have done the trick :)
Moved this out of the way made things easier.
In between the rain I removed the dreaded diesel pump filter assembly - that's it it's not going back! Well not tonight anyway. It's...
Looked under the bonnet
[ATTACH] Displaying ignorance here .....is this the water temperature sensor here just behind the dipstick?
Thanks so perhaps that's my answer too - noise like a tin of old bolts otherwise same symptoms, new VCU, bearings etc six months ago runs fine...
Changed belts today and oil and filter and saw this :-
Saw similar on the other suspension arms should I be worried or spray with oil or...
Did you resolve this one or did you flog the freelander???
Changed Oil and Filter
Replaced the two ancillary belts - thanks michielvdv
I have a strange scraping noise on the front of the Freelander -
2006 Freelander TD4 Mk 1 97,500 miles not much off road
These are the...
Very nice and shiny - where do you find the time.
You have a serious floorpan problem there.
Do reply - interested to know how this could happen without you knowing about it from noise clunking or other obvious symptoms.
Presumably you have tested the compression on all the cylinders?
Finally got the prop shaft back on
2006 Td$ - sorry Td4
93.5k just replaced VCU
I think that there are probably a few cookies to give out - for those of you who said VCU splines (joke)- you should trust your first instincts....
The big hammer worked in conjunction with the new small cold chisel set from Amazon. Putting the propeller thingy (wife speak)back on the...
Win A Cookie!!!!!!!
What is this ??? There is a clue in the image.
Actually I didn't use the big cold chisal bought some new ones off amazon
Stanley 418298 Cold Chisel Kit (3 Pieces)
Ended up using all...
Finally separated the propshafts from the VCU that one on the front part is a bugger had to get a bigger hammer.
Oh dear wait for the stream of derogatory emails - standard advice is a TD4 I think if you can get service history that includes a VCU change...
Separate names with a comma.