And also a lot gooderer. :D
You haven't learned much in ten years on here have you. :D
Guess you didn't read what I wrote OEM stat with seal £12.50 Island 4x4.
OEM should be fine stat should come with seal.
I make a point of never encouraging people to do stupid things. But it's your car ruin it as you require.
Their are some people who ask really silly questions on here from time to time. If you want really basic get a series 1 or even a wartime Jeep...
The EAS is pretty simple to sort out, might I suggest you get someone who knows what they are doing to look at it.
The compressor should if in good order produce around 175psi at the outlet shortly after start up. If by placing a finger over the outlet flow can...
MAF is for exhaust gas inflow measurement for EGR it has nothing to do with how the engine runs.
Not good but not dead yet. Never delt with D so if that's what is fair enough. As far as I recall from memory resistance through sensor is around...
Nominal voltage to sensors is five volts. Main things to check are supple voltage presence, resisted continuity through sensor, and sensor to...
The correct size pipe also helps.
The voltage to the sensors is five. Check them for continuity and for voltage.
Was talking EAS sensors there silly me. Suppose you can swap around speed sensors just different wire lengths front to rear. You need five volts...
No. Early ones only go in the one position. Later ones can be swapped side to side but not front to rear.
If BECM is unlocked, if you want to leave it unlocked you need to pull the diag in out plug at front of BECM to work on HECAV. White plug from memory.
The Nanocom can have problems communicating with HEVAC if the BECM is unlocked. See the spec sheets.
Is BECM unlocked ?
They won't register speed if the gaps are too large
Separate names with a comma.