+1 - it's pretty - so it could burn you !!:D Also, +1. OP:- IMO, consider most fixings as consumable - use new BZP fittings, grease them on...
Sedimenters are pretty notorious for being a PITA as they age .... cheap enough new though... failing that, then as post #127 - LP has failed...
IMO, as is the way with modern "cars" - the new deafener is full of electronic "solutions" to problems that do not exist ..... quite often they...
There's a company that do a full air suspension kit for the deafener, so IMO, perfectly possible... http://onairsuspension.uk/ Make sure you are...
Welcome Aboard :) Picz of the '74 RRC are required ;) itz the rulez :D ;);) Sunny here today too - high in the Pennines :)
IMHO, seems that your spring has lost it's spring :) possibly due age o_O
I bought a new FFRR in 2004 IIRC, it was about £50K ( I'm trying hard to forget!!) - biggest waste of money ever known to man - it was so much...
Ideally, a cct test needs to draw a similar current to the rated load on that circuit - a test light is great for basic cct integrity - but might...
Spider does not apply to the auto - still has immobiliser. Most likely air in the system .... How much noise does your FIP make IOEO ? What sort...
Have you actually got power to the stop solenoid on the FIP ? If your D1 is a manual - could be the spider playing up .... Battery going flat...
Glad you're making progress... have you looked in the D1 ETM for the earth points ? very similar vehicle after all... Best way I have found of...
On a D1, bleeding the cooling system is as easy as removing the bung in the thermostat housing, and letting the injun tick over cold - and it'll...
Excellent! ..... took em long enough!;) :D:D:D ;)
Agreed. I have the same meter, and it is at least as accurate as my ( rather more expensive ) Fluke kit. +1. Buyer Beware, I suppose :rolleyes:...
I find clutching at straws to be a bit self defeating, so, I'd go back to absolute basics:- ^ get these two bits sorted, Discool gave some...
I have the BT200 - very pleased with it - accurate on CCA, and quick for testing ripple voltage..... :) The 24V compatibility is useful on plant,...
OP:- IME, Dinitrol and Bilt Hamber do excellent rust treatment products ..... (ask me how I know :rolleyes:) For rust conversion, I use BH's deox...
Was there in the first photo :confused:
I think the rules are slightly different w.r.t pre and post 2001 vehicles... IIRC, post 2001 somewhere in the rules, they are allowed to remove...
:rolleyes: - struth! Hope you get a delivery this week then :)
Separate names with a comma.
