It lives behind the front seats with a little rubber O-ring that clips it to the bulkhead. I can't really see how it is a pain. It just lives...
This looks like a decent little one. Do you have that one? Is it good? Mine is bench mounted which is great for making new lines but no good if...
That ML with the trailer and 2 cars MUST be above max train weight for the ML!
Lucky! I usually expect to find a hole big enough you can stick your head in behind these!
True that!
Sadly it probably won't be worth the paper it's written on. The report will all be second hand info to the officer writing it up and in a case...
No, the long skinny things that you tighten a wing nut down on.
I just bought a roll of pipe and bag of M10 x 1 unions and a Tee etc. I ordered a set of SS braided lines too. Luckily I have access to a bench...
Have you checked for oil in ECU loom? These are the same symptoms I had last year, managed to fix it on friends drive with some brake cleaner in a...
Utter nonsense. Ashleigh is who I dealt with too, you can say you know for a fact that she knows there is an issue and is therefore lying as she...
Well my door arrived with a ding in the bottom corner where it had no doubt been dropped! Door had slipped free from its cardboard protection band...
This sounds like my story all over again, this is from their email to me last summer: "Looking at the timescale of when you ordered it must have...
From my experience of using several galv yards over the years I'd say that the quality is achieved through a good dip spec. If you specify to them...
Nice one, he is a top bloke, I have had some business dealings with him over the last few years. He is some man.
Have you tried Google? https://letmegooglethat.com/?q=defender+floor+plastic+nuts CZA4705L...
A crank and cam misalignment I can see, you said flywheel and crank which is the same thing. This is more feasible.
Thanks, I certainly think it improves the whole setup.
The pipe came form this chap: https://www.brtmotorsport.co.uk/products/landrover-defender-200-300-tdi-clutch-hose?_pos=2&_sid=8dcb57bfd&_ss=r...
I will be fitting a new master cylinder over the next day or so, I will see if I can identify the colours of the wires for you while I am in...
It runs from the switch on a 2-3 wire loom which also has the reverse light wire and runs up to a connector on the bulkhead where it then heads...
Separate names with a comma.
