Nice find - do you actually get what's in the picture, i.e. VW 505.01 spec, as it's on the label but not in their description?
I think @Western Slope Rover is now an honourary Limey....
For what it's worth.... For the last few years I've used Fuchs Titan GT1 5W-30 on @sierrafery 's recommendation. It's made to a VW spec to suit...
How old are the air bags? They can develop a leak on the fold of the bag which will seal or not depending on the position. Clean the bags as much...
Could you use spiral wrap, may be a bit easier and a bit more protection? Good job on finding the cause, by the way! [ATTACH]
Hoping I've fixed water leak No.2, caused by me fixing water leak No.1....:rolleyes:
It's limbering up, getting ready to get down, man.
Well, I think I've found it.... Having a look around with a endoscope thingy at lunchtime didn't reveal anything, so I got underneath it this...
When you say the 'tyres move in the air', is that all four wheels off the ground and driven, or just that they turn by hand? The transfer box...
Would that leave a pinkish stain around there?
That's a thought.... It happened when I braked for a junction I think, and I've had three amigos a fair bit recently when stopping at (weirdly)...
I'm losing coolant somewhere, but can't see it. I had a leak at either end of the fuel cooler but I've fixed that now. At first I thought it was...
Got this pretty display the other day - what's that about? [ATTACH] Plugged in my Nanocom but no stored faults. Would this be a fault in the...
@Intestinalworm - this is odd, I went and checked the clips I took off my cooler and looks like they were wider than yours. These are 7mm, and...
I'll have to go and measure the ones I took off now! Sure they were a bit wider than that, but I'm probably wrong....
I got them from hcl-clamping.co.uk , the ones I got were 5mm wide. I should have checked beforehand as I could have got away with a wider one...
I might be wrong, but aren't there blanking plates that you put between the valve and the intake manifold? They'd be a lot harder to spot.
@accynina , I sent a PM the other day, but not sure if I did it right? Just sending my address so as to get a keyring...
Might be able to, I think you'd still have to get the fuel pipes out of the way, and that's a bit of an ask while the cooler is still attached!...
I set to on removing the cooler today, now I have the tools to do it. Removing the bottom bracket bolts was still a sod as you can only get...
Separate names with a comma.
