Hi, guys. My Disco 300 Tdi's temp gauge has started playing up. It takes ages to move off its starting position and only gets to just above...
There didn't seem to be enough room to hit the arm with a puller in place. I've done the two hammers on ball joint tapers before INSTEAD of using...
Any kind soul have a PROPER drop arm puller they could lend me or pop round with to get mine off my 94 Disco? I need to replace the dust seal...
Got the MOT ok. The visible (Dust?) seal has split dropping the grease/accumulated weeping of fluid. Having cleaned up the area there is no (or...
Not sure about the poor pedal feel but I have had the light on due to a sensor out of position(Light tap with hammer to re-seat) and corrosion on...
Thanks guys. I'll be back.......
Flat tyre on the front (Mrs imp gets a flat on garage forecourt same day!) Brake fluid ****es out of holed brake line above back axle (must be the...
Its been a while now since I sorted mine out but I think I did something like lift a front wheel and rotate it back and forth with my hand on the...
You might be lucky. They might have come off the same tool but with the periphery cut to suit the 3 or 5 door. If your's needs MORE trimming you...
Is it an air-con vehicle? If so how much for the solid pipe from the radiator to the filler valve? It runs under the header tank then pops up onto...
Broken wire at the spade on the injector pump solenoid. Stuff on that side of the engine has been moved recently and this wire was now under...
Pulling away onto an island and the Disco engine just stopped dead. Coasted to a safe place and tried to fire her up. She cranks but there is no...
Not a transmission expert by any means so sneer at me by all means. Are you sure that the Auto box has changed up into its highest gear? When I...
I got rid of my "clunk" the cheap-skate way on my R380. Having an early 300 the input gear in the TB had less spline than the later gears and no...
I used JB Weld on a Husky alum rad that I had knocked one of the tubes that the fins are attached to off the top chamber. The beauty of this stuff...
I am in exactly the same boat. Plus my CD changer rarely works. Wheel-arch liner out, then.
Last year I was in a fix so I bought a Halfords battery to suit my 300 tdi. It has been superb. Batteries do like to be charged on a charger now...
Those bits are slightly over-size to sit on top of (over-lap) the original panel work. No-one can see this, of course, and you would have to be...
I had a leak around the lift pump but mine was an oil mist coming out of a tiny breather hole in the pump. Also it is always worth slackening and...
Spot-on, Jamesmartin. Broken plate allowing the upstanding part between the springs to move. Tricky to get the box-like cover off the housing. I...
Separate names with a comma.
