This useful thread deserves a bump! Ravenol now lists an auto fluid suitable for the Jatco. Not cheap, but it is an alternative. Inch...
I appear to have solved my V6 Hippo's hesitation issue. It had a major lag when I hit the throttle, bad enough that I was worried I had some...
You could always rig a support strap up to the roof bars to stop the rack from bouncing over bumps. That's what worries me about those hitch...
NO BAD NEWS........That's the attitude!!! Thank you!
Lately I have had a delay on acceleration on my FL1 V6. It feels almost like a bad turbo lag. Throttle down, wait, wait, wait...Vroom! Trying the...
Thanks for that Nodge! Sounds like some mental preparation is in order before taking that job on. I'll have to do it on a weekend when I don't...
Nodge, How was the solenoid change job? I may be changing mine sometime over the summer. Was access reasonable from below or did you need to strip...
That's funny! I always thought that they were just retainers for the plastic trim. :oops:
235/70R16 General Grabber ATs on my Facelift FL1 They fit just fine and my speedo is reading dead on. I did fit 5mm spacers but could have got...
That's a side-effect of owning a V6 Freelander!
If you watch through this how-to video done by a US supplier it will give you an idea what the job requires. The Freelander they show is the NAS...
You would be best to find a brochure (online or elsewhere) describing the trim levels as sold in France. I have a 2004 SE V6 but mine is the...
Three years ago I moved and went from an 8km commute in my MGF to a 40km commute. I didn't want to be running the MG to death in cutthroat traffic...
Mine got an oil change but no wash as there is rain coming this week, and I was too d**n lazy as well. It gets a nice pat on the dash every day as...
Mine's a 2004 FL1 5 door V6. Had it for 3 years. It was my problem child for the first couple of years but I have got it mostly sorted and it's...
If you need one why not support Aussie tourism? The Northern Territory in particular. :) https://ntunofficial.com/products/nt-wheel-cover...
I hope it isn't the ECU as the last time it went it cost me $800. for a used replacement and cloning. That started out as misfire messages as...
Here is what came up. There were no codes for the Jatco. I am wondering the the coil on cyl. 5 is getting a bit tired. I replaced some coils a...
Agreed Nodge. I will hook it up to the Blackbox today and check the codes. Saturday was taken up wrestling the gearbox back into the MGF. Not a...
Redlined my V6 Hippo today and it went into limp mode which gave me a bit of a scare.:eek: When I got home I shut it off, gave it a minute and...
Separate names with a comma.
