My understanding is that a new cam and lifter set pair together very quickly, once this has happened you can't replace a lifter on its own. You...
Hi there and welcome
At least they are ready to get to for stripping, cleaning etc. What was more worrying, turned the ignition off and at least some of them were...
Think i found the lpg leak!! From the top of the injectors,!!!
Super will remain E5
Engine don't have a problem as such, it's all the twiddly bits. Tanks, lines, carbs etc. It will eat solder, melt certain types of rubber, etc
You can make something like this quite easily to balance your carbs
Just make sure you use less than a full bottle of water between them
Set the butterflies using a feeler gauge (or even a nail) so they are both approximately equal.
Set the idle jets to the same number of turns.
Hi there and welcome!
If you need a large breaker bar or a professional gun, i would suggest they have been done up far too tight to the point of...
is that why it purrs?
suck it n see.. well.. maybe not.. but i'll try it in the landy and do a blind taste test!!
i know my bike isn't compatible :(
the P38 and L322 are supposed to be perfectly fine running E10
i would be checking the oil for either coolant or diesel
but it would cost 10p more o_O
you mean make a car last longer? :eek:
low use can be a good thing but also a bad thing.. if not maintained.. take caravans for example, or horseboxes are anther good one only used once...
i'm the same.. i've got a car sat on the drive now. It sounds bad but i cant be bothered to sell it because i know its a heap that nobody would...
think thats the same for most cars
I'm wondering why you'd chose to do this?
Separate names with a comma.