UPDATE: I took the Freelander out for a drive last night, indicators stopped working for me on 2 occasions. Tried the hazard switch both times and...
ok, thanks. I was thinking it was the contact within the switch/stalk, not the external wire contacts.
So if the indicators stop working from the stalk and the hazards still work from their switch, it must be the stalk? Do you need to take the...
Our facelift (53) Freelander 1 is having some intermittent issues with the indicators. Sometimes they work fine, other times nothing at all. Its...
Any problems doing it? Any photos? What did you prime it with? what type of metal is it?
The middle/high brake light on our Freelander is corroded and the paint is flaking off. I suspect this is a common problem. Has anyone else had...
We have a '53 facelift TD4 Sport with 18" Alloys, now in the market for 4 or 5 new alloys. Seen some reasonable prices on the net for some, I...
Droitwich, I'd be interested to know who you've been talking to? I've been mainly looking at companies online so far, most near Birmingham and...
Hi All The 18" Alloys we have on our sport are looking a right state, 2 are not too bad but the other 2 are so badly corroded its unreal....
Thx :) I presum this is available as a spare part? (the thermostat)
Is it also used to shut the FBH off after a while?
It's a 3:1 ratio at he moment diesel : petrol, I've read lots or problems online about having any petrol at all in modern high pressure diesel...
Thanks :) What's best to use to drain fuel? A piece of hosepipe and siphon or some sort of pump? Is it easy enough to refit the plate removed by...
Our late 53 TD4 has a FBH (fuel burning heater) fitted. I have noticed I is on all year round! Is there some sort of thermostat that detects...
My partner made a mistake yesterday and started filling the TD4 with petrol. There was almost £20 of petrol put in. Once she realised her mistake...
Thx guys Bled it through with fresh fluid. Seems much better now! :)
Hi Guys The clutch pedal on our TD4 seems very loose, you can press it almost 3/4 down before it seems to do anything. I've tried to check...
Car seems to be running fine, started immediately this morning, no sign of any problems.
They did thanks, also cleared ECU code after fitting so lets see how it goes!
Totaly agree, already decide in my head that if I get any further problems I would double chek the new loom, remove the Synergy and run with the...
Separate names with a comma.
