Not at all. I am happy to be put right when I've inadvertently infringed good manners on this site. My experience of setting up a new thread to...
Thanks for the advice. I shall do that. What put me off doing that was the prospect of posting into the void, with me the only follower of the...
I have done no work on the Landrover since the lockdown started in March. The vehicle is in an open fronted shed. The wind blows in dust. The...
About to do some welding... I understand that underseal burns well. How far back, away from where I'm welding, should I remove it?
Thanks, that looks to be a very useful place to learn.
Thanks once again. Keep this up and I'll end up owing you a pint.
I've stripped down a large proportion of my Discovery 1 and now it's time to start putting it back together. So I'll be welding panels and...
I'm just welding replacement panels into place and reinforcing the chassis where I feel it might not be all that it should, with a budget of just...
Hi All... I've got to the point where I'm not ripping stuff out anymore (for the time being) and wanting to weld stuff back in. So I need a MIG...
Thanks for the heads up. Landrover's spot welds, in my experience, are just good enough to tear the wrong piece of metal, the one you would rather...
"A bit tight then"? Does that mean that money is no longer a bit tight? Can I "borrow" a fiver?
How is the rear floor side panel attached to the wheel arch? Are the two just glued together? [ATTACH]
I bought a fuel tank cradle... and it was delivered by Hermes... or so the e-mail I got said. The tracking information went further, it told me...
Thanks. Greatly appreciated.
Congratulations on having finished. If only I were a quarter of the way along...
The carrier plate which held my fuel tank in place is rusted to buggery. However, the part is now obsolete, and even the aftermarket suppliers...
Everything is awesome, everything is cool when you're part of a team...
So it should have a great big lump of rubber attached to it, then?
[ATTACH] This strap on the underside of the chassis next to the spring... why's it there? What's it for?
That's just like hanging a house door, then. Good to know.
Separate names with a comma.