I've disconnected the battery and pulled the door card off.
From what I can see, it's all ok and seems to be moving freely. Currently scratching...
I've just had a quick look. I can hear the central locking doing its thing in the door when locking and unlocking. It's just not unlocking the...
OS/R central locking fault [IMG]
I have had a search for this problem but cant find anything in here that matches my exact issue.
I've done a bit of work over the weekend. Used the recommended electrical contact cleaner on the steering column. So far all seems well.
I have ordered a set of discs, I think the seized caliper has caused a warped disc. When it all gets hot it can be felt through the brake pedal.
I was thinking about that but I've never stripped a caliper.
I had cleaned and greased the slider pins before I took it out for a spin. The piston was a bit of a struggle to move but it seemed to free off ....
Took the old girl out for a run today. Gearbox was really smooth then after a few miles I felt a thumping from the front. Made an unpleasant...
Just ordered some servisol, thank you
It was a 1985 Daimler Ds420.
So if I spray contact cleaner into the solenoid, and it just cleans it, will it stick again
I got rid of a car with a distributor on it last August.
Will a contact cleaner keep the solenoid thingy lubricated?
Ok, I'll get some contact cleaner tomorrow and squirt it in. Thanks for that.
Was all I had to hand that I could spray in. What would you recommend I use to spray in?
Ignition sensor is now done. Hopefully. Drilled a hole in the column and sprayed that little bugger with lots of wd40. Seems to have done the...
Right, Christmas and new year done.
Got to sort out the ignition sensor fault before I can do anything else. So just about to get to it.
I will have a look at the weekend. Cant do a lot this week, early starts and late finishes, back home in the cold and dark
I will have a look, thank you
I read that a poorly battery can cause it so put it on charge but it was fine
I've not messaged anyone, just put my woes on here
I've claimed down considerably since yesterday. Now not looking forward to tackling the steering column module.
I'll sort the brakes out then...
Separate names with a comma.