This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Reaction score
20,304

Profile posts Latest activity Postings About

  • Hi James I have just bought an Evoque need to change gear knob manual not auto you ever changed one before cheers
    goonarmy
    goonarmy
    Make a post in the forum
    Hi James, what clutch do you recommend for Defender 90 300tdi, fork punctured through on mine and will do rear oil seal etc while there?
    Hello all I've just recently bought a Freelander 06 3-door and I'm looking to find the rubber seal for the removable hardtop can anybody help please.
    Hi James, I've got a 1974 2.25 diesel Santana. Please can you tell me how to change the starter solenoid. Thanks.
    Hiya young James, long time no see almost.
    its the old "easye 1"
    So much under the bridge so they say, my much loved early 3 door disco long gone, went to a collector your way somewhere. i ventured into a shiny black TD4 auto, as my left leg got worse so need autos now.. Hope your well, and the world continues as It should.
    cheers..
    Ian.
    Hi James, just a quick one. Can I use 80/90 gl-5 in my 98my d1 diffs or does it HAVE to be gl-4. Thank you
    Hi I have a freelander k series 1.8 it starts and drives really well but once warmed up it is very difficult to start takes a few attempts it is not losing water I have changed the two coil packs the crank position sensor and the plugs but this problem still persists any advice would be gratefully appreciated
    Hi James
    I’m in the process of rebuilding my 2a suffix d gearbox,but I’d like to convert to all synchro whilst
    It’s all in pieces
    Could you tell me exactly the parts I’d need for this please

    Thankyou
    James.
    Hi James I am a new member got a 1996 p38 d s e went out this morning dove fine stopped it put it in park came back put it in rev nothing only slight grinding in park any help please
    Hi James, can you point me in the right direction please? I'm on the LandyZone rescue list, who do I contact regarding the international rescue stickers?
    If you could help
    Many thanks
    Dave
    Good afternoon sir, as a knowledgeable man on the subject, could you please give me some advice on gearbox oil for my defender td5. Recommendation is for MTF94 so presume this is best but have you any advice on one over another? You have Westway and Smith & Allen's Geartech in the low twenties per 5l up to LR at over sixty.
    Is there that much difference?
    Thanks James, appreciate any advice.
    Rab
    Hi James sorry to bother you I’m trying to phase a prop. 1) if I’ve put the castor rite after a lift should I still need to rephase my prop, 2) I’ve been 4 settings each way from the standard Land Rover phasing and still no joy at all, so do you think there is any point carrying on or do you think there is something wrong, I’ve even taken the prop off twice to check it’s that. Many thanks for your time
    Morning James, hope your well and weather is better than here :( sorry to trouble you again, but how the hell do I remove the seat belt tie rods? Some times wish I left things as they were! But where's the fun in that. Hope you can help. Thanks again for all the help so far
    Dave
    Hi James, got a question for you. I've read all threads regarding doing body lift on my D1 v8 .the only thing going I'm not sure of is what do I slacken on the steering to allow the body to lift? Is it in engine bay or down lower I slacken? Hope you can help
    The other news is my doing really well .we were round there today and he looks like he's grown a bit already lol
    Take care mate
    Dave
    Do you know which fault code scanner I need for my Range Rover Sport 2006 2.7 diesel. I bought a U480 but when plugged in states Link Error, in the leaflet with the scanner it states this means my car in not compatible with the scanner
    ovalandrover
    ovalandrover
    I have a Nanacom Evolution thatwill do the 2006 Sport with the right unlock codes it can also flast the ECUs
    Hi James, I am looking at either having my transfer box reconditioned or an exchange, Defender 90 300tdi, LT230. Do you still do these and what would the cost be, I can deliver and collect. Thanks.
    Hi All I am in search for the TD% defender 2001 workshop manual please can any body assist were I can down load I have spent hours on google search for the rave down load version but just can not locate it
    Thanks
    Pieter
    [email protected]
  • Loading…
  • Loading…
  • Loading…
Back
Top