P38 4.6 Exhaust Manifolds

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

kooky_guy

Well-Known Member
Posts
2,410
Location
Sandhurst, Berkshire
Hi Dudes,

I've got a crack in one of my manifolds so will need to replace it at some point.

Is it best just to replace it with another standard tubular jobbie, or is there any real benefit to going for something a bit modified (in which case I would need to replace both - downside!).

There is a theory that my cats have been removed or otherwise buggered about with so I might need to replace the whole system at some point and was wondering about something slightly more rumbly sounding. Anybody got any suggestions?

Guy
 
Hi guy, i dont think you would get any thing much better than the standard manifolds as they are made from stainless and have the heat shields around them, which is a must. After maret ones will be pretty much the same.

rich
 
Dont bother with new ones,if they are cracked just mig them up - they weld beautifully with mild steel wire.
 
Back
Top