jiloppy
Active Member
- Posts
- 247
- Location
- Lanarkshire
HI guys how do you disconnect the barrell from the steering column. There are two pins left and right side but no nuts or screw head type in the pins if you get my drift. cheers
disconnecting barrell.
- Thread starter jiloppy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nige Cowie
New Member
- Posts
- 44
- Location
- St Asaph North Wales
Hi,
These so called pins are what is left of the shear bolts when they where fitted the head of the hex nut will shear off for security reasons, use a small chisel on the edge of these and tap in a anti clockwise direction. You will need new shear bolts to put it back together.
Nige
These so called pins are what is left of the shear bolts when they where fitted the head of the hex nut will shear off for security reasons, use a small chisel on the edge of these and tap in a anti clockwise direction. You will need new shear bolts to put it back together.
Nige
