110 progress diary...

Due to this 110 being bought as a project and not currently in use as an everyday car i though i would put a lil diary up of the work done with loads of piccys and stuff so ill update it as and when i get chance to play with it.
yesterday i went down the unit in the afternoon to get my head round some of the problems.
firsly the mechanical issues....
engine ran when i bought but now and again i did have some powerloss and it wouldnt rev, also a bit too much smoke of the wrong colour.
upon inspection it seems that the fuel cap has been letting water in the tank so when i drained the fuel its basically a 80% mix of fuel and water.
tank cleaned, fuel lines blown through, injectors blown out and cleaned up.
full engine service, intercooler and pipe worked cleaned out, turbo inspected, compression test shows good an all 4 and it now starts on the button without fail (or when you cross the wires) hehe
finally, a good clean up of the engine bay so its much nicer to work on in the future and i can also inspect the bulkhead much better for when i do the future welding work, turns out the bulkhead both sides is spot on!!!



more updates as and when.......

looking good Raz.

few more bits to scrub up on the bukhead, much nicer car to work on than the disco engine bay wise.

you might want to stick a return between each picture link so the pics int going off screen.

dunt keep putin piccies up, just do the work an let us see it wen dun!!!!!!!!!!!

i know, my mistake.

wha? just a before and after?

yep cos i can't seem to be able to buy one so am ded jealous!!!!!!!!!

theres still those we spoke about.

nah drove one yesterday an got fed up wiv bangin me elbow on the door all the time, so gonna bite the bullet an start the major reconstruction of me disco (just bin signed off for a further 2 weeks)

what exactly is the mot list?

weldin and more weldin

bulkheads come up forsale on the bay every now an again worth a look for save fixing one up

dave

jacks906 said:

bulkheads come up forsale on the bay every now an again worth a look for save fixing one up

dave

Click to expand...

And your Point is?

redhand said:

And your Point is?

Click to expand...

thought i needed repairing the one that is on the truck already??

i repaired an old one an its more hassle than its worth

dave

No Stig's got a Disco that needs welding..

i got the impression off the post here on the bulkhead picks

http://www.landyzone.co.uk/lz/f16/new-toy-pics-63428.html

dave

I don't think that'll be a problem for raz somehow Seeing as this is his company and he makes all the parts himself WWW.CSCOMPONENTS.CO.UK Land Rover Off Road Engineering and Protection Specialists

no way just bought some bush wires off him then lol

spam