Disco 2 How do I stop internal lights coming on?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

john snoo

Active Member
Posts
592
Location
uk
I went to shoot some rabbits last night on friend's fields. I have 3 internal lights, front, rear seats and boot. I can turn off front with switch, but not sure how (or if poss) to stop rear two coming on when doors open. Is there a way?
thanks
 
Well, yeah probably! I was wondering if it's a setting thing which I can adjust, or worst case something I can adjust using diagnostics software. I should have been more clear! Yes I am handy with a pair of wire cutters but that's a last resort, as I am a bit too handy :D
 
Hi John, OK I said take the bulbs out but I have just been out to check my 3 roof lights in my 1999, D2 all have off switches so why does yours not???
 
frostythor said:
Hi John, OK I said take the bulbs out but I have just been out to check my 3 roof lights in my 1999, D2 all have off switches so why does yours not???
Click to expand...
mine have small buttons (one per light) but that doesn't turn them off when doors are open, it just turns them on when they are shut (for passengers to read with or whatever). I think black tape or bulb removal look like the best options, thanks everyone
 
You can do a trick which is not very hard, get to C0484/0102, cut the purple wire at pin 13 and insert a switch, any switch is good cos there's no big load... that's the permannent feed to the lamps so switched off they'll rest cos they are controlled on the earth path... there are cases when the wire is in other pin not 13 but it's the only pure purple one so you can't miss it
C0484.jpg
 
Rabbits are stupid, just drive around and they will suicide.

A rabbit once worked itself really hard to suicide as I was on a bike and could not swerve round it, it had its final wish of death by Suzuki.
 
sierrafery said:
You can do a trick which is not very hard, get to C0484/0102, cut the purple wire at pin 13 and insert a switch, any switch is good cos there's no big load... that's the permannent feed to the lamps so switched off they'll rest cos they are controlled on the earth path... there are cases when the wire is in other pin not 13 but it's the only pure purple one so you can't miss it
View attachment 271586
Click to expand...

WOW! What else is there to say? Except thanks SF. You Da Man. (Apologies if I 'misgendered' you, pretty sure I didn't somehow) :)
 
You must log in or register to reply here.

Similar threads

S
Discovery 2 electrical issues.
Replies
3
Views
294
Anaconda
A
Neptune1922
Disco 2 At the moment following a new chassis on Feb 1st I now have quiescent problem.
Replies
7
Views
409
Neptune1922
Neptune1922
Bantam1
Disco 2 Interior lights staying on
Replies
2
Views
474
Bantam1
Bantam1
S
Disco 3 (LR3) Vibration on acceleration and cruising
Replies
9
Views
591
SM1543
S
Blob
L322 Fixed (Sort of) - Every single module in fault. Where to start?
3 4 5
Replies
81
Views
7K
Mark Piercy
Mark Piercy
Back
Top