We're pretty sure it was from when we suspect he fell downstairs last Christmas. Insurance will pay for him go get a brainscan but it is supposed to be a traumatic procedure so the vets are hesitant to do it. Until then they are just trying to find a drug cocktail that works, realistically though we're just buying time between seizures but it is unlikely that he'll ever be seizure free.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 43,884
- Location
- Near Poitiers SW France
brianp38dse
Well-Known Member
- Posts
- 19,557
- Location
- heathrow
I started mine and put it back up on the drive.
- Posts
- 31,270
- Location
- North Shropshire
For the second time now, it's been missing on first start. Will need to take the plugs out to see how they look.. failing that, plug nano in and see which cylinder is missing.. hoping it's bank 1
- Posts
- 4,440
- Location
- Rotherham
Datatek
Well-Known Member
- Posts
- 43,884
- Location
- Near Poitiers SW France
No DPF or catalytic converter on a FBH so lots of pollution
No DPF or catalytic converter on a FBH so lots of pollution
Yip, stinks but worth it for the very cold mornings ahead.
- Posts
- 5,677
- Location
- North Manchester
I've polluted the air at least 4 times today, it's just a shame it doesn't heat the seat and steering wheel as well
I've polluted the air at least 4 times today, it's just a shame it doesn't heat the seat and steering wheel as well
I had mine set on the timers but I ordered a remote that came yesterday - just need to pair it now!
- Posts
- 31,270
- Location
- North Shropshire
Hoping to get the abs reluctor ring fitted today and figure out why it's misfiring
- Posts
- 18,941
- Location
- Buckinghamshire, UK. ('95 DT)
Might be of interest to someone:
https://www.ebay.co.uk/itm/RANGE-RO...=p2349624.m2548.l6249&mkrid=710-127635-2958-0
https://www.ebay.co.uk/itm/RANGE-RO...=p2349624.m2548.l6249&mkrid=710-127635-2958-0
- Posts
- 2,427
- Location
- Isle Sheppy
Can’t beat the old night heater on a cold morning click the remote 30 minutes before needing the car and it’s roasting bye the Time you leave
Datatek
Well-Known Member
- Posts
- 43,884
- Location
- Near Poitiers SW France
Load of bludy wimps, had minus 40C in Canada, no heated seats or steering wheel, did have an electric block heater though otherwise there is no way the car would start.
- Posts
- 2,427
- Location
- Isle Sheppy
Been there done that waking up in trucks freezing no night heaters or not working to old for that c,,,,,p now little bit of comfort needed
- Posts
- 31,270
- Location
- North Shropshire
Well, I've had a look at replacing the abs ring, not a chance of getting the caliper off without taking the hub off and trying it in a vice. It's stupid 12 point nuts and they are more or less rusted round
If it fails MOT then I'll ask the garage if they can do the ball joints for me, i simply don't have the wherewithall right now.
MOT expires 6th, does than mean the 6th is the last day, or the 5th?
If it fails MOT then I'll ask the garage if they can do the ball joints for me, i simply don't have the wherewithall right now.
MOT expires 6th, does than mean the 6th is the last day, or the 5th?
jwrrc
Well-Known Member
- Posts
- 619
- Location
- Warwickshire, UK
You're good up until 23:59 on the 6thWell, I've had a look at replacing the abs ring, not a chance of getting the caliper off without taking the hub off and trying it in a vice. It's stupid 12 point nuts and they are more or less rusted round
If it fails MOT then I'll ask the garage if they can do the ball joints for me, i simply don't have the wherewithall right now.
MOT expires 6th, does than mean the 6th is the last day, or the 5th?
Datatek
Well-Known Member
- Posts
- 43,884
- Location
- Near Poitiers SW France
Had to cut those off on one of mine and buy new bolts.Well, I've had a look at replacing the abs ring, not a chance of getting the caliper off without taking the hub off and trying it in a vice. It's stupid 12 point nuts and they are more or less rusted round
If it fails MOT then I'll ask the garage if they can do the ball joints for me, i simply don't have the wherewithall right now.
MOT expires 6th, does than mean the 6th is the last day, or the 5th?
- Posts
- 31,270
- Location
- North Shropshire
Normal bolt heads are much better!! They can rust much more before the become round
Datatek
Well-Known Member
- Posts
- 43,884
- Location
- Near Poitiers SW France
I have to agree with that but on assembly lines the double hex head slots into the nut guns more easily.
