Disco 2 Key programming

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Andy Warren

Well-Known Member
Full Member
Posts
1,656
Location
Hertfordshire
Hi all, is there enough info on this to programme it my sons D2 please?
If so I'll fit the micro switches & get a new case & blade, many thanks.
20211121_110816.jpg
 
Is it me or is that circuit board looking very corroded?
Hi, not sure if it's just dust/fluff, it's from a D2 he sold about 2 yrs ago & this key was mislaid after the micro switch fell off & he couldn't use it.
He's since got another D2 which only has one key so I thought I'd repair this one for him & get it programmed.
I'll give it a clean & see what it's like after that.
Is there anyway you can test to see if it emits a signal (once the micro switch is fitted) before trying to get it programmed ?
 
Hi, first of all the LED should come on when you push any of the switches, for the signal you need a frequency scanner or nanocom must detect it during the programming process, no other way to see if it really emits or not, auto locksmits who are dealing with fobs should have scanner so if you find a friendly one it's not more than 1 minute job to check
 
Back
Top