Stereo Removal (FaceLift DoubleDin)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

James.

Member
Posts
55
Location
Ferndown, Dorset
After reading alot on here and other forums I decided to do this tutorial as this really isnt as bad as people think .. yes there's alot to do but its all simple stuff .... I've even taken pictures :p

... on a few pics there are no screws in the holes as I had already taken them out before taking the picture :rolleyes:



Hope it helps!




80917698.jpg


Remove 2 screws located on the sides by the gearstick ... its a torx but a alen or flat head will fit ok :)


26645651.jpg


between the gearstick and the handbrake there is a little cover, pop it off and you will find 2 screws (The ends will be rusty as these stick out uner the car ...good idea LR!)


87763962.jpg


Open the handbrake cubby box and undo the four screws and remove this.


39601706.jpg


There are another 2 screws to undo (right side of pic holding the surround on)


83918266.jpg


Disconnect the plugs for the switches (mine were rear window & sunroof)


93539237.jpg


Now drop the Handbrake slightly and slide the surround off.


39526294.jpg


now unclip the gear surround... lift the opposit end to the HDC button and then it just unclips off.


33398528.jpg


Disconnect the HDC and unscrew the gearknob.


23395858.jpg


With a flathead under the bottom front and lift up and foward ... litrally pops off.


17653309.jpg


Undo the 2 screws.


76728550.jpg


Now the control surround will come free an inch or so.


60554825.jpg


Disconnect the buttons on the Left and Right.


37443640.jpg


...along with Lighter Socket.


35816629.jpg


Last four screws holding stereo in ... Job Done!


76069717.jpg


This is the Plug on the back of my 6CD HK System.
 
Do you know how to wire a aftermarket 1 din stereo in I've brought harnesses and stuff I've got power but no sound can you please help if possible cheers
 
Do you know how to wire a aftermarket 1 din stereo in I've brought harnesses and stuff I've got power but no sound can you please help if possible cheers

Did it work before?
What stereo was in before, as some have an amplifier in the boot, under the lift up flap.
 
Did it work before?
What stereo was in before, as some have an amplifier in the boot, under the lift up flap.
Yeah matexall worked before I can plug the old one back in works fine I plug the new stereo and harness in and it all turns on just dont have any sound ‍♂️♂️♂️ baffled mate
 
Do you have the additional amps? In the boot and or under the passenger seat?
If so they will need a signal to turn on.
As above, post a new thread in the main freelander section with as much info as poss, radio makes ect.
This will have been done many times, it just that peeps might not see your question here.
 
Back
Top