I think I have odd hubs

I was just in the garage cleaning and painting front axle parts and I noticed that the hubs are a bit different. One looks like I would expect with the thin machined ring around the hole for the oil seal on the other one that machined bit is much bigger. I think I may have an early and post 1980 hub but not sure. Do I get another, mainly because my ocd is going because they are different lol, pics below..Thanks You should have seen the bearings in the swivels WOW talk about worn

Better check a rear then and see what you have there.

Already done the rear and I have 2 of the little lip on the back. I've ordered a replacement for the odd unpainted one. Probably turn out the axle is a later one and the funny hub is correct one. That is usually how it goes.

The small lip one is right for late 2a and then 3 up to 1980. I think your odd is from a post 80 Rangy,

tottot said:

The small lip one is right for late 2a and then 3 up to 1980. I think your odd is from a post 80 Rangy,

Click to expand...

also right for a narrow track Sankey

tottot said:

The small lip one is right for late 2a and then 3 up to 1980. I think your odd is from a post 80 Rangy,

Click to expand...

Thats what I was suspecting, Ive ordered a replacement if for no other reason than it brings on a raging case of OCD. IT doesnt match, it doesnt match arrrgh.

Later post 80 version has two bearings the same size.

I don't really pay attention to them when I took them out but they are still in the garage so I will check them.

**** the ocd, it’s part of the character and history