Flossie
Well-Known Member
- Posts
- 10,618
- Location
- Shropshire
2001 my.
4 bolts that hold the front hub on, mine are crusty
4 bolts that hold the front hub on, mine are crusty
P38A Bolt part number please
- Thread starter Flossie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianp38dse
Well-Known Member
- Posts
- 19,571
- Location
- heathrow
Flossie
Well-Known Member
- Posts
- 10,618
- Location
- Shropshire
That's the badger
- Posts
- 1,736
- Location
- Hertfordshire
As above, only £2.77 but LR have discontinued 'em so britpart it is the bolts are 12x60 high tensile, not sure of the pitch (looks like 1.5) though.
the bolts are 12x60 high tensile, not sure of the pitch (looks like 1.5) though.
As above, only £2.77 but LR have discontinued 'em so britpart it is
Doesn’t matter who they’re sold by. They’re all Atlas 12.9 grade. LR and Britpart were supplied by the same company.
- Posts
- 1,736
- Location
- Hertfordshire
Ah that's handy to know as I've had some cr@p bits from BP especially my D2 transmission brake adjuster set.
I've been through a few sets as it is and they've all had the same stampings on. Like the genuine halfshaft seals for my P38 are the same as the allmakes versions.
