P38A 2.5 DSE TURBO

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Cheers for that alan, its the 4" curved rubber bit that I need. Tried a bog standard piece of hose and it just kinks with the size of it, mind you it was about 5mm to big.
 
Yes the only place i can find it listed is in Europe. €17 +postage bit steep for 4" of rubber hose.
Going to have to take mine off and measure the metal pipe diameter then see if I can find a universal jointing piece. Cheers for you help once again.
 
Yes I found the metal one but no one seems to stock the rubber bit on the end. Anyway the alloy pipe is 16mm on so I've ordered a 16mm id 90 degree rubber hose coupler for £8. Hopefully the works. Thanks for the help, will post outcome for anyone else who has the same problem.
 
I looked epdm up some time ago and it said it was not suitable for oil and hydrocarbons, as i was looking for a bit of rubber to do the tank to filler neck.
 
Back
Top