What have you done on your 90/110/130 today?

bukko said:

Washed it.

Click to expand...

Ha, have got mine quite road dirty this week, two very full trips of garden waste to the recycling centre and transporting petrol turf cutters and earth rotovators this afternoon...Lucy's really earning her keep

v8250 said:

There are videos of PIAA's on their website + sure the same on YouTube

Click to expand...

Had a listen on the website and quite liked them until I saw the price. 65 quid for a pair of horns?!? No thanks

the_wolf said:

Had a listen on the website and quite liked them until I saw the price. 65 quid for a pair of horns?!? No thanks

Click to expand...

Try eBay, they're readily available for ~£40 incl' delivery https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2499338.m570.l1313&_nkw=piaa+horns&_sacat=0

Here's my set https://www.ebay.co.uk/itm/254922394607?hash=item3b5a8f0bef:g:12kAAOSwtZBgY1j6

After scrapping a dozen rusted tunnel cover screws, finally got the dead reverse light switch replaced - still no joy. No power to the switch, onto the bulkhead connector block…

Two out of Three Safari Door hinges stripped and renovated, Third one is being stubborn - every screw and bolt on this ‘90 has been over painted and has rusted out underneath - patience, patience, more beer……

Looking for possible causes of the whine that's just started from the gearbox area only to find a different problem. Oil all over the rear and edges of the front disk. Oil seal decided to **** itself. Luckily had new corteco oil seals and new drive flanges. Fixed that but no neare finding cause of the whine. Time to remove props I think.

Zed. said:

did it work??

horn on our '86 is a bit weedy, been meaning to do something about it for ~2 years but.....



Rich.

Click to expand...

Mine too. I’m thinking about a set of train horns...

Hoping to pick up my latest purchase later. A hi lift jack from FB marketplace not far away...

Knappster said:

Mine too. I’m thinking about a set of train horns...

Click to expand...

I've got a horn from a tank.....

Bosch made thing from Pz3 era and possibly other wehrmacht vehicles

Loud as fhoooooook!

Mrs sez it needs to be fitted

it'd double the value of the Ninety

Rich.

bought a pair of recon front calipers on ebay, sold by Bigred as shop-soiled for £50.97 (pair) posted

Rich.

Took a drive to the Cotswolds and collected my new jack from a very nice couple who have a lightweight on a galvy chassis. We talked landies for quite a while.

Well I was going to fit my new gloss black wing mirror covers and cant fathom how to swap them off? Do you take the rubber seal off on the mirror side?? Or is it a full wing mirror arm off jobby

Ripped the sheep shed of the back yesterday and fitted some 30mm wheels spacers , new wash wiper stalk arrived today as the previous owner snapped the original one off with his lanky legs so another job for the weekend , always plenty do do with the mudpluggers

Replaced headlights with LEDs. I can actually see more than 10 feet ahead in the dark now!

I have bought a new battery and will fit it this afternoon

Finished putting the Dynamat under the seat box covers, fitted the new seat belt receivers and bolted in a cubby box for my jelly babies.

Door hinges next….

slomofo said:

Finished putting the Dynamat under the seat box covers, fitted the new seat belt receivers and bolted in a cubby box for my jelly babies.

Door hinges next….View attachment 245409

Click to expand...

I do like those cuddy boxes

Changed the front drive flanges. Went on to do the rear flanges and half shafts to find rust in the middle of the shaft. Very strange. I'll have to change the bearings and races now as they're pitted.

Painted the bottom half and rear... second coat tomorrow. Will be doing a full resto post at some point with everything over the last few months to get to this point !

grand job , see it just slips nicely under the garage door there

I fitted the new wash wiper stalk as it was on a switch after being broke off by previous owner , wash button on the dash, the jack plug had been cut off and wiring colours didn't match the new stalk, got the wipers running but couldn't fathom the washer, definitely got the power wire and earth correct but couldn't get it to work , will go at it again with fresh eyes but at least for now I can use the wipers properly