Who stole my engine?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

Mid-life-crisis

Active Member
Posts
112
Location
Northern Ireland
Advice please
I gave my 2002 L322 with 2.9 TDi a fresh drink of oil and filters today.
Along the way of doing it I spotted a couple of oddties
This thing with a blank plate on the end and a jubilee clip holding it there
20210417_172534.jpg

And these two plugs hanging about aimlessly nearby
Anyone any idea what they're for?



20210417_173220.jpg
 
Guessing EGR pipe been removed, looks like it is sitll leaking going by the amount of black puff on everything?
 
The two plugs are for an additional cooler for warmer climates- if it's not there you don't need it is the impression I get.
The plate on the jubilee clip is a poorly executed egr delete.
Not sure in the missing pipe...
 
The pipe you’re missing goes down to the turbo and controls the vanes on the turbo. There’s another one under the inlet that controls the egr.
The turbo is on the left hand side looking from the front of the car and check there isn’t a pipe dangling.
 
Thanks eyeryone
Spot on https://www.landyzone.co.uk/members/lynall.62401/ and https://www.landyzone.co.uk/members/merloch91.170702/
Poorly executed egr delete, was leaking like a sieve through the joint that can rotate. Fixed now by removing the joint and using a steel plate and lead washer - sounds like it's a botch also, but it works fine.

Also spot on https://www.landyzone.co.uk/members/109inches.119822/ (so jealous) - amazing the difference a few pence worth of 4mm braided pipe can make when connected between the vacuum resevoir and the boost control solenoid.

Back to the air suspension - now got an 'articulation validity fault'
I've calibrated it using my IID tool, but it persistently rides at a different height especially at the front even when it's locked in normal ride height mode.
 
Mid-life-crisis said:
Thanks eyeryone
Spot on https://www.landyzone.co.uk/members/lynall.62401/ and https://www.landyzone.co.uk/members/merloch91.170702/
Poorly executed egr delete, was leaking like a sieve through the joint that can rotate. Fixed now by removing the joint and using a steel plate and lead washer - sounds like it's a botch also, but it works fine.

Also spot on https://www.landyzone.co.uk/members/109inches.119822/ (so jealous) - amazing the difference a few pence worth of 4mm braided pipe can make when connected between the vacuum resevoir and the boost control solenoid.

Back to the air suspension - now got an 'articulation validity fault'
I've calibrated it using my IID tool, but it persistently rides at a different height especially at the front even when it's locked in normal ride height mode.
Click to expand...
Can you read any live info on the height sensors? It could be a dead spot on a sensor..
 
You must log in or register to reply here.

Similar threads

J
Defender 300 Tdi Engine Swap
Replies
4
Views
271
jer_300Tdi_90
J
H
L322 gearbox
Replies
5
Views
905
myfirstl322
M
H
L322 gearbox
Replies
1
Views
563
Mark Piercy
Mark Piercy
FlatbedPilot
Freelander 1 My 4th Freelander. What Could Possibly Go Wrong?
Replies
15
Views
2K
FlatbedPilot
FlatbedPilot
P
L322 4.4 M62 smoke problem
Replies
11
Views
2K
PetrVIVIVI
P
Back
Top