200tdi exhaust downpipe modification.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Gmacz

Well-Known Member
Posts
968
Location
Forfar/Dundee
Anybody got the 200tdi into a 90 exhaust downpipe modification kicking around and for sale. Greasing the ujs and noticed my downpipe is nearly right through, time for the conversion pipe now.
I can get a new one but second hand is better and cheaper.
 
I've been after one for a while, just a tatty one that I can copy but in stainless steel.
Steve Parker ones are considered the best but cheaper ones on eBay for a lot less but don't look as good.
What you using at the moment?
 
I made my own using the original manifold pipe and just cut up an exhaust pipe until it fitted and welded the joints. The whole pipe has just crumbled away to rust. Doing it the easy way this time.
 
I've also wondered about getting a SP downpipe galved for longevity.
I had my SP downpipe hot zinc sprayed around 12 yrs ago but that process only does the outside. I've had to patch it twice but only the lower part where it joins the existing system.
 
Certainly very happy with my Steve Parker one, couldn't bribe anyone i know to make one for me and as i don't weld i had to buy.

No regrets at all it fits well and is well made and you get a lovely clamp as well..
 
I also couldn't justify the expense on such a flow restricted internet conversion pipe so fitted a 300 turbo and manifold with all the gas blowing straight out freely
 
Back
Top