Code reader

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Andy Warren

Andy Warren

Well-Known Member
Full Member
Posts
1,721
Location
Hertfordshire
Took delivery of a Foxwell NT530 today, after registration,plugged it into my Freelander 1 & had a quick play & it found historical codes with front abs sensors which I cleared. I'll plug it into the Disco later in the week & see what it finds:confused:
 

Attachments

  • 20200916_132141.jpg
    20200916_132141.jpg
    211 KB · Views: 90
Stanleysteamer said:
Having a Foxwell pro 520 I'll be very interested in the differences between it and yours.:):):)
Click to expand...
Hi, not sure how we go about that but I'm open to suggestions, no sniggering at the back.
I know we both asked the guru "why not a 530 " but I went ahead anyway as it was in a sale at £122. It seems alright with plenty of menus/options inc. fob coding so time will tell.
 
Andy Warren said:
Hi, not sure how we go about that but I'm open to suggestions, no sniggering at the back.
I know we both asked the guru "why not a 530 " but I went ahead anyway as it was in a sale at £122. It seems alright with plenty of menus/options inc. fob coding so time will tell.
Click to expand...
Didn't know you'd asked him too! Musta missed it!
You paid a lot less than i did. All i know is it has helped fix my Landy and wifey's Citroen so saved a ton of money already!
Good luck with it!
As for the differences I could just google it and look at what menus etc it has on it. But as it covers the whole of the Landy range that could take a while!
 
sierrafery said:
Maybe foxwell fixed the ''bugs'' on 530 since we spoke or they just used the older softs on it, important is that it's working well.
Click to expand...
I hope so:). It's worked for the 20 odd minuets earlier. I did clear the ABS fault codes on the Freelander earlier & took it for a spin so when I reconnect it tomorrow I'll see if they've gone for good.
Took the F/L out for a 6 mile spin & re-checked it for fault codes & I'm pleased none re-appeared.
Plugged it into the Discovery, had a quick look at eng. related fault codes & it had bucket loads :D, all 5 injectors, EGR etc(I presume the injector related faults are from a failed fuel pressure reg. the previous owner had replaced not long before I got it). As it appears to run ok shunting it about on my drive whilst I'm working my way through it. (only driven it the 3 miles home when I picked it up in May) Should I clear all the faults, or leave them & take a closer look, if anyone could let me know what they think? I'll try & run through all the menus later & see what else lurks:eek:. Much appreciated.
 
Last edited:
I've got a good collection of diagnostic equipment, including a Gap Diagnostics IID BT, A Delphi clone, a couple of ELMs plus Torque and the Icarsoft I930, which although cheap and limited, actually works ok as a basic code reader/eraser. I also have one for the Fiat's in the household, but can't remember the name off hand.
 
Thing about the Foxwell, apart from being a shedload cheaper than all the others, is that it does the whole range of RR products and OBD2 and you can buy and download the software for other manaufacturer's ranges cheaply too.
Compared to a Nanocom or a Hawkeye that lets you work on just one particular vehicle, unless you pay through the noew for an unlock code.
And it seems to do all I want it to....
...... and no, i'm not on commission!!!!!!!!!!!!;);););););)
 
sierrafery said:
in a nutshell: icarsoft is full of sh*t compared to foxwell
Click to expand...

Stanleysteamer said:
+11111 to ^ re Foxwell!
Click to expand...

Nodge68 said:
I've got a good collection of diagnostic equipment, including a Gap Diagnostics IID BT, A Delphi clone, a couple of ELMs plus Torque and the Icarsoft I930, which although cheap and limited, actually works ok as a basic code reader/eraser. I also have one for the Fiat's in the household, but can't remember the name off hand.
Click to expand...

You can get a basic code reader for £15 from eBay, but the icarsoft and Foxwell are about the same price. Obviously £15 isn't going to buy much, but what does the Foxwell do that the icarsoft doesn't?
I'm genuinely looking for amswers here, I'm probably going to buy one!
 
Stanleysteamer said:
Thing about the Foxwell, apart from being a shedload cheaper than all the others, is that it does the whole range of RR products and OBD2 and you can buy and download the software for other manaufacturer's ranges cheaply too.
Compared to a Nanocom or a Hawkeye that lets you work on just one particular vehicle, unless you pay through the noew for an unlock code.
And it seems to do all I want it to....
...... and no, i'm not on commission!!!!!!!!!!!!;);););););)
Click to expand...
Now that was a fast reply - minus one minute!
 
wattfield said:
but what does the Foxwell do that the icarsoft doesn't?
I'm genuinely looking for amswers here, I'm probably going to buy one!
Click to expand...
I had the iCarsoft CR Plus 4 years ago that can be used on a multitude of car brands. Worked great on my wife’s BMW X5 and mother-in-law’s Audi and Cadillac but I needed it to do more than just resetting the ABS for 3 amigos on my Disco 2.
I sold the CR Plus and got the older Foxwell NT510 for my Land Rover, Wife’s BMW and now for our Toyota. The Foxwell works great!

I will say that on the Foxwell website it mentions that it can recode fobs for the Disco 2. I could never get it to work on my NT510 so I had to use my Nanocom.
 
Been an interesting thread so far. I've been on the lookout for a nanocom at a price i can afford for a while, but have looked at others, with Hawkeye second choice, but never really hearing enough about the Foxwell to be confident enough to buy one.
I currently have three amigos that I'll want to sort (i have a 2001 D2 Td5 by the way), but would be good to have something that will deal with most things that nanocom and hawkeye could deal with. At the moment, I'm seriously thinking about getting the Foxwell NT530. My issue has always been if it will work with my D2, but by the sounds of it, I don't need to worry too much.
 
According to others on here, the Nanocom has a nasty habit of getting mixed up when it comes to which wheel sensor on an axle is the one causing a 3 amigos problem.
This is a fault the Foxwell doesn't have. My Foxwell worked fine when sorting out the 3 amigos problem.
 
Stanleysteamer said:
According to others on here, the Nanocom has a nasty habit of getting mixed up when it comes to which wheel sensor on an axle is the one causing a 3 amigos problem.
This is a fault the Foxwell doesn't have. My Foxwell worked fine when sorting out the 3 amigos problem.
Click to expand...
Yeah, I think I'll go Foxwell. Cheaper than even a second hand Nanocom, no brainer if it's also more reliable.
 
You must log in or register to reply here.

Similar threads

M
Discovery 4 - Limp Mode Cold Start Manifold absolute pressure issues
Replies
2
Views
373
Graculus
Graculus
B
Discovery Sport LR DS and Ghost 2
Replies
4
Views
772
Bp112
B
nevillen
is the FOXWELL NT530 scanner any good for 2006 range rover vogue 3.0tdi?
Replies
1
Views
850
kds
K
M
Freelander 2 (LR2) Freelander 2 2007 P042e EGR
Replies
6
Views
294
Nodge68
Nodge68
H
Freelander 1 ABS weird issue
Replies
9
Views
1K
Nodge68
Nodge68
Back
Top