Disco 2 Clutch, Worth replacing anything/everything?

To be honest, I've not a clue with clutch wear etc. As far as I can see, everything is in decent nick here, but would rather drop needed cash now than pull a bastid gearbox again.

Flywheel seems fine, no real slop and goes back to where it's meant to be, will obviously do the spigot bush and bearing, no question.

As far as I can tell, it's done about 50k miles since 2015 (date mark on the clutch) so I'm pretty sure it's not brand new, but obviously, experienced input is appreciated.

Hard to tell if everything is ok without driving it. On the face of it looks all right . What made you strip it down in the first place?

Gearbox replacement, transfer box leaking.

Ended up ordering a new valeo kit anyway, figure tidy boxes and a new clutch in a 500 quid disco used for towing lots is still decent value.

How much rotational play on the flywheel?

lynall said:

How much rotational play on the flywheel?

Click to expand...

Not a lot. Springs back nicely. No DMF complaints.

Looks clean and tidy too. So I suspect was done the same time the clutch was.