Ignition switch issues

First off I'd like to say thanks for letting me join!! Second I could really use some help figuring out how to remove the dash section just below the navigation screen to get to my ignition switch, I popped the plastic ring out around the key hole but I can't seem to see how to release the dash part to get the ignition switch out. I really appreciate any help, I've been struggling and I don't want to damage anything . Thank you, 2008 range rover l322 SC

That's a security risk question on the open forum, maybe an l322 bod could pm you with a solution maybe....

Go to Technical Archive at top of this forum. Look for RAVE link and download the "All Models" version. There's Mac-OSX and Windoze versions.

Then look for 2002MY onwards NAS version of the workshop manual. Section on interior fittings explains all the dash & console removal.

pwood999 said:

Go to Technical Archive at top of this forum. Look for RAVE link and download the "All Models" version. There's Mac-OSX and Windoze versions.

Then look for 2002MY onwards NAS version of the workshop manual. Section on interior fittings explains all the dash & console removal.

Click to expand...

Thank you much appreciated.

hi mate please look at my tread i did it all myself and its easy no need for nav removal.. as long as the key is not in the dash its next to the gear lever ....

johnga22 said:

hi mate please look at my tread i did it all myself and its easy no need for nav removal.. as long as the key is not in the dash its next to the gear lever ....

Click to expand...

Thanks, but the key is in the dash, I have apt at land rover on friday, going to get them to fix it as well as my ac. Just dont have time to pull the whole dash. Ridiculous design

I thought the dash was designed to come out fairly easily on the L322? Didn't @wammers have to his off to change a bulb recently?