How to top up transfer box without a pump

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mr G Imp

Active Member
Posts
180
Location
Gloucestershire
Hi all - was going to top up transfer box tomorrow so will be picking up some oil from Halfords, the oil does not come in a squeeze bottle with a pipe as I expected, so need a good way of getting it in - I can’t get a pump or syphon at this short notice on a Sunday so need to improvise! Any ideas??
 
Halfords sell an oil transfer syringe 200cc capacity.
This should be enough to top up oil. It could be used to do oil change but would need lots of refilling, ok if you have the time
 
Well halfrauds did have an orange concertina pipe thing so got that for now and ordered a better pump from screwfix as I want to do the diffs at some point as well. Will be spending a fair bit of time under the beast coming up as I’m doing the rust and waxoyle treatment.
 
Buy a small EP 80/90 bottle with its flexible filling tube from your local service station and hang on to it.
I've had mine for years and I just decant from my 5 litre container when needed, and needed it will be, for your axles.
I do the same with ATF fluid having retained my original Dextron bottle with its tubular neck.
The additional cost works out at zero.
 
Excellent advice! Just needed something temporary to top up so should have got a squeezy bottle in the first place...

Buy a small EP 80/90 bottle with its flexible filling tube from your local service station and hang on to it.
I've had mine for years and I just decant from my 5 litre container when needed, and needed it will be, for your axles.
I do the same with ATF fluid having retained my original Dextron bottle with its tubular neck.
The additional cost works out at zero.
 
Either a small litre bottle with the flexible top. Or a sports drink bottle will work well. I carry one full of oil for when I go away if incase I need a top up.

Iv got a little sealey bottle with a pump on the top for in the garage. Works well. Tho only have it as it was a Christmas present.
 
20200526_191431.jpg

This is what I use.
Great tool for many jobs on 90 etc.
 
Back
Top