Seat box
- Thread starter Jab13
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Riggwelter
Active Member
- Posts
- 186
- Location
- Sweden
I did just that in my 88' truck cab. First of all, I got myself a cubby box.I then took a trip to the local DIY and bought myself a sheet of aluminium and some L profiles (also aluminium). I cut the L profiles to form a square to fit the cubby box wooden frame. I riveted the L profile frame to the sheet, which I had cut to the same size as the 348855 cover. In the sheet, I drilled holes that matched the holes in the seat base. I then drilled some holes in the sides of the L profile frame, put in the box and used regular wooden screws to attach it to the frame. Last thing was to use the cover screws to attach it all to the seat base. Old Smokey isn't at home at the mo', or I would post a couple of photos.
Bobsticle
De Villes Advocaat
- Posts
- 26,293
- Location
- Manchester
Think you might be confusing seat box with cubby box there.
I would imagine a defender box would be far too big but you might be able to chop it about a bit.
Riggwelter
Active Member
- Posts
- 186
- Location
- Sweden
Ah. That's definitely what I did, I read "seat box" but thought "seat base"... and then it went from there 
