i really need some help please can someone help

hi all I am new on here and really need some help please can anyone or someone please help me

thanks

tysgame

...with what?

hi thank you for replying I have a range rover sport 2.7 I cant undo the crank bolt ???
iv tried everything

tysgame said:

hi thank you for replying I have a range rover sport 2.7 I cant undo the crank bolt ???
iv tried everything

Click to expand...

Right, first off, you'd be better posting a thread on the Rang Rover (Sport?) part of the forum, people may be watching that and not this.
Secondly, I don't have one and never have done, but i've undone a few crank bolts in my time.
So, does the crank turn in a clockwise direction and is the bolt a normal right hand thread?
If so, there is a rather brutal seeming way of doing it.
Make sure if you turn the engine over on the key, the car cannot start, find a suitable relay or something to pull, (you haven't said if it is diesel or petrol, I don't evn knw if RR sports were ever made in diesel form, ) so disable it.
Put a socket and breaker bar together, and find a postion to put it in so that the breaker is sticking out horizontally to the right when you put the socket on the crank bolt.
Position an axle stand just under the end of the breaker bar.
Flick the engine over on the key.
The breaker bar will hit the axle stand and shock the bolt loose. Or it should.
I am assuming you have tried heating it a bit to free off the Loctite?
Failing this, and if there is no room to do this, there is a special tool you can buy which will do the job, only trouble is I don't know what it is called, I'll have a quick search and see if I can find it for you.
there it is
https://www.ebay.co.uk/p/1188566357...MI06bkmoXV6AIVCPlRCh2eegOvEAQYBCABEgJGKPD_BwE
and someone suggested removing the mpi fuse, dunno what that is, multi port injection? Does your car even have one?
Search with "how do i disable starting on my 2.7 Range rover sport? on google and you'll find a way of doing it.
Search engines do work but you need to ask them precise questions!
Best of luck

I take it you can't get an impact gun on it?

hi sorry its a diesel iv tried putting a 21mil socked on a bar and turning it over but it didn't give doze it undo clockwise ?? im lost with it pal ??

yes iv tried it it just will not give in lol

tysgame said:

hi sorry its a diesel iv tried putting a 21mil socked on a bar and turning it over but it didn't give doze it undo clockwise ?? im lost with it pal ??

Click to expand...

Me too as I don't know the vehicle. Although the tool I mentioned is used by a very very respected bloke on here, @jamesmartin . Now I've tagged him he'll porbably pick up on your thread and might be able to help. Although alerts don't seem to be working at the moment. But he's on all the time so he'll see it in the top right corner of his screen if he has a look, as most of us do.
Get onto the Range Rover part of the forum, you'll get more targeted help there. Someone like @wammers might know.
Best of luck!

thank you both of you for your help
I really don't understand computers as im disleksik my spelling is bad so a lot of peapol never understand me

you will need to remove starter motor and insert the crank locking pin and the front crankshaft bolt is tight as it's torque loaded oh and the alternator mounting bracket has to be removed. An impact wrench will not undo the crankshaft bolt it's far too tight..

Lefty loose!!

so I need to take of the starter put in a pin ?
and turn it antiy clock wise mate ??

There is a locking pin yes..

The crank bolt is standard thread, left to loosen right to tighten etc etc..

Best read up on here... http://www.disco3.co.uk/forum/

is this for a 2.7 d 2007 mate ??? sorry for the spelling

im really sorry but what do I look under so sorry
beat you wish you never replyed too me lol

The 2.7 Range Rover sport is basically a Discovery 3 in a posh frock.
Follow the procedures for a D3.

Welcome to the forum

Main forum index:
www.landyzone.co.uk/forum

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

Hello and welcome