Sport Rear brake pipe

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rayc59

Member
Posts
32
Hi so confused can anyone tell me what the flairing for rear brake pipe running along body going into top Flexi hose. Is it double bubble single bubble or anything else 2006 rover sport diesel tried googling and so many different posts
Thanks
 
Hi

there 4.75 Din / ISO bubble flare

used the following flare tool with great success, enclosed pic of when I done mine

hope that helps

EAB90AF6-6908-41C9-B7B9-180FF1A24DD9.jpeg


58316B8F-EC71-4B16-9E3F-D687D8455ACC.jpeg
 
@gstuart beat me to it, just take it off you will soon find out which it is.

Slow coach , lol :p;)

I did have to cut the nut off and make a new flare because it wouldn’t undo

done these when I had the pleasure of replacing my rear upper wishbones, what a job that was
 
Thanks that is the tool I was looking at but was not sure if it was bubble or double bubble
 
Thanks that is the tool I was looking at but was not sure if it was bubble or double bubble

ur very welcome and indeed was also in the same boat of not knowing , was really pleased with that flaring tool and done good flares each and every time

I also used a mini tube cutter which ensured the ends were square along with not leaving any rough edges or bits as I made sure I didn’t use a hacksaw

always happy to help where I can
 
Back
Top