Drive in 200tdi conversion south west

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
That's why I swapped.

I fitted bars to carry stuff on on my soft top

05AD5A61-B943-4D56-87DD-17947D6C6184.jpeg
 
Don’t forget an update when you e had the Tdi fitted. Mine is great, I wouldn’t have a 19J unless it’s getting sold abroad! And some pics of the conversion if you can.:cool:

UPDATE - picked it up this afternoon, starts when you turn the key, can change up the gears when going up hills !! does not smell anywhere near as poisonous...Will be towing with it tomorrow so that will be a good test. Temp gauge not working for some reason. Will add some pics soon.
 
UPDATE - picked it up this afternoon, starts when you turn the key, can change up the gears when going up hills !! does not smell anywhere near as poisonous...Will be towing with it tomorrow so that will be a good test. Temp gauge not working for some reason. Will add some pics soon.
Have you changed the temp sender? You need the Disco unit rather than the Defender unit.
 
Who did the engine change? Looking forward to hearing your thoughts on towing. Mine tows great!:cool:
 
Not sure but Its a defender 200tdi engine which has gone in to replace the 19J - I'm sure its something simple
Ah I hadn’t realised it was a Defender engine, I thought you’d have done the usual Disco engine conversion.
Check you thermostat.
 
Cool will have a look when I have some spare time (never!) the gauge is dead as a dodo no movement at all
Well if it worked before and you’ve used the old loom, then either the sender is knackered or the thermostat is stuck. But if I was you I be making sure the engine isn’t over heating. Have you checked your oil?
 
Well if it worked before and you’ve used the old loom, then either the sender is knackered or the thermostat is stuck. But if I was you I be making sure the engine isn’t over heating. Have you checked your oil?

If the thermostat was stuck would it not show overheating on the guage which was previously working -I’ve only driven it 10 miles or so and was fine (I think) heater working etc
 
If the thermostat was stuck would it not show overheating on the guage which was previously working -I’ve only driven it 10 miles or so and was fine (I think) heater working etc
The 200tdi runs pretty cool anyway. I ran for a few weeks without a working fan and never over heated. The thermostat is always a good place to start, for a new one to be safe. Then fit a new sender, again, might as well.
 
The 200tdi runs pretty cool anyway. I ran for a few weeks without a working fan and never over heated. The thermostat is always a good place to start, for a new one to be safe. Then fit a new sender, again, might as well.

seems like the water is going round the rad so I’m guessing it’s the sender thingy or a dodgy connection. Took it with a tipper trailer up some pretty steep hills today though and was fine. Tows nice !
 
Cool I have been Looking at them, they look really strong - is it a standard cab hood you have there?

No, the hood is a truck cab hood from all wheel trim, ring them up, great company to deal with. The hood is well made and fits well and is much warmer and quieter than a full tilt.

http://www.allwheeltrim.co.uk/

I do have a standard length hood aswell and it fits on the bars just the same as it would on the standard bars
 
No, the hood is a truck cab hood from all wheel trim, ring them up, great company to deal with. The hood is well made and fits well and is much warmer and quieter than a full tilt.

http://www.allwheeltrim.co.uk/

I do have a standard length hood aswell and it fits on the bars just the same as it would on the standard bars

So the one in the picture is the extended hood for roll bar? I have come across allwheeltrim in my searches as well - the issue I have is that I want to strap long lengths of wood on the roof/bars or whatever, the only way I can think is fit a hardtop and roof rack/bars - or build some frame like Fred dibnah haha
 
Back
Top