Shoulder belts in a Series?

[/GALLERY]On YouTube I have seen a couple of Series Rovers with modern shoulder belts. Can't figure out how the upper anchor point is attached. In the photo you can see the set up. On the outside of this vehicle no bolt or rivets could be seen. Anyone added these type seatbelts?

PS: How do you add a photo from your computer? Upload file does not seem to show anything.

Sorry for being dense but what are these? Where do you get them and how do you attach them to the body?

Gord Wedman said:

Sorry for being dense but what are these? Where do you get them and how do you attach them to the body?

Click to expand...

mounting bracket for seat belt .bolt in the inner roof gutter

Which UK vendors carry them and what do they call them.
Thanks

google adu710100 and adu710110

If you've got a truck cab they are a different part.

OK, thanks guys. Those bits are pretty cheap so may order them and see about fitting. Have seat belts from a P38 that maybe will work.

The part name is hardtop corner bracket. You'll find the right hand bracket here and the left hand bracket here. The seat belts (inertia) are to be found here. That's for the hard top, but as previously mentioned, the truck cab mountings are different.

My truck cab had no belts when I bought it, but it came with all the stuff needed (read: bolts in the chassis), so all I had to do was to get the inertia belt and put it in. If you have a truck cab, there might be a label under the steering wheel (or on the passenger side) indicating the car has the mountings required.

They should be the standard 7/16 unf threads too