Polybush supplier

For those with polybushes which manufacture did you use?

Flo-flex seem to be the cheapest option, any good? Or Bearmach or polybush?

I suspect they're all made in the same Chinese factory but personal opinions appreciated.

Or britpart for that matter

I used the standard britpart ones from paddocks on my disco 1. They were still fine after eight years, 90k and lots of greenlaning when I sold the vehicle.

I got all the ones for the Alfa from here:

https://www.powerflex.co.uk/products/Land+Rover-16/t1.html

Tenebreaux said:

I got all the ones for the Alfa from here:

https://www.powerflex.co.uk/products/Land+Rover-16/t1.html

Click to expand...

They look good but expensive

I used polybush pro they did the job

I put a Superpro bush kit on mine in the autumn of 2013 and they were still fine last time I looked. The only items that weren't in the kit were the rear anti roll bar bushes, so when my old ones were getting loose this summer, I was pleased to find that Superpro now make something suitable so I've got Superpro on everything now. Expensive end of the market (much more so since I fitted mine) but so far so good. About 80,000 miles on them now

payydg said:

They look good but expensive

Click to expand...

Yeah, they're not the cheapest but the quality is excellent.

Thanks for the recommendations, will have a further look.