Bolt missing?

Hi to all on this new years eve, could any one please help to identify my missing bolts, as shown where the red arrow is on the photo size or part number, thanks

I am sure I have the part number as its down in the garage will get it in the morning

Pretty certain they're a standard M10 bolt (17mm spanner size). I think I have M10 x 25mm long ones in there on mine.

Avocet1 said:

Pretty certain they're a standard M10 bolt (17mm spanner size). I think I have M10 x 25mm long ones in there on mine.

Click to expand...

its an m10 but a flange bolt with a 13mm head

Ah! Looks like the originals on mine "went West" some time ago then!

jamesmartin said:

its an m10 but a flange bolt with a 13mm head

Click to expand...

Thanks, just one other thing are they bolted up tight or is there supposed to be a bush or rubber mount fitted?

just tight

Mine are bolted up tight with a steel washer under the head of each of them. Not sure if they're supposed to be like that though!

Avocet1 said:

Mine are bolted up tight with a steel washer under the head of each of them. Not sure if they're supposed to be like that though!

Click to expand...

Thanks a lot that will do me, don't know when or why mine were missing

If they've been missing a while, you might have to clear the rust out of the threads in the captive nuts before you put bolts in. M10 x 1.5 pitch.

The M10 bolt needs to be tightened to about 40Mm, and no more in this application.